637251
28
Zoom out
Zoom in
Previous page
1/77
Next page
5. D/R expo (Aircraft and Helicopter)
The basic setting of the Helicopter cont sett is NO.5 gyro, NO6. Throttle, Lim. DV (Digital volume).
Generally, this function is seldom used, but Lim. DV (Digital volume) can control the operation
range of digital volume -100 ~ +100. If DV is programmed, throttle channel is operated only
programmed range.
- D/R
Affects the overall travel which in turn affects control response sensitivity equally throughout the
range of that channel. Reducing the dual rate reduces the maximum control rate as well as overall
sensitivity.After programming the max moving angle of the servo at the servo sett function, the
D/R switch is ON, the basic value of the normal ight can be programmed. Depending on the
D/R switch is on/off, the Aircraft to have a high control rate for aggressive maneuvers and a low
control for smooth, precise maneuvers.
- Expo
Affects the sensitivity around center but has no affect on the overall travel. Positive Exponential
reduces control sensitivity around neutral for more precise control but does not affect the maxi-
mum control response. Negative exponential increase control sensitivity around neutral.
- D/R expo
Press the direction button to highlight the D/R expo then press the ENT button to access the
function. The cursor is at the dual value of the aileron channel. Press the ENT and the directions
button to highlight and adjust the desired value then press the ESC and the direction buttons to
select the expo value in the aileron channel. Press the ENT and the direction buttons to highlight
and adjust the desired value then the press the ESC and the direction button to select the hyphen.
Press the ENT button then the pop up message “push desired switch into position on” appears.
Move the switch that you want to assign as the dual on/off . That switch is assigned to the aileron
dual on/off switch.
NOTE : If the quick link switch is ON when the quick link function is activated, the dual value can
be programmed to go with the purpose of the quick link The elevator and rudder channels can be
program in the same method with the aileron channel.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
press
press
press
press
press
28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-12 HoTT - S1002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-12 HoTT - S1002 in the language / languages: English as an attachment in your email.

The manual is 13,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info