637251
21
Zoom out
Zoom in
Previous page
1/77
Next page
- Cut off
Press the direction button to select the cut off line then press the ENT and the direction
button to highlight and adjust the value less than -100%. Press the ESC button to remove
the highlight.
NOTE : The value of -100% is the cut off position the user can program, if the cut off value
is programmed less than -100%, the breathing hole of Engine carburetor is block or the
speed controller lets the motor off so the power is not delivered to the Helicopter.
Press the direction button to select +150% in the value.
Place the throttle stick at the desired position and press the ENT button then adjusted
value is applied (The adjusted value is activated when the throttle stick is in that position).
NOTE : the value of +150% is the throttle stick position where the cut off function is
activated.
Press the direction button to select the hyphen then press the ENT button. The popup
message“push desired switch into position ON”appears then move the switch to the desired
position (The cut off function is activated when the switch is moved to that position)
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
press
press
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-12 HoTT - S1002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-12 HoTT - S1002 in the language / languages: English as an attachment in your email.

The manual is 13,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info