542407
92
Zoom out
Zoom in
Previous page
1/96
Next page
44 / 48
S1042_sh_V1
Firmware update
Firmware updates of the transmier are carried out via the back
DATA port using a laptop or PC with Windows 7 ... 10. You will also
need a USB interface, order no. 7168.6, and adapter lead, order no.
7168.6A or 7168.S, which are available separately.
The programs and files required can be found in the Download area
for the corresponding products at www.graupner.com
Download this soware package from the Internet, and unpack it on
your computer. All other informaon can be found in Internet in the
same page where the soware package is available.
Connect the adapter lead to the USB interface. The polarity of the
plug-in system cannot be reversed. Note the small chamfers on the
sides. Do not use force, the plug should click into place easily.
The update is carried out via the "HoTT device" program secon of
the program "Firmware_Upgr
ade_gr_Studio". Please follow the
notes of the soware. The further procedure is also described in
detail in the manual contained in the data package. You can also
download these from the download page of the product at
www.graupner.com
Transmier soware update
Perform update step by step
Before each update check the transmier baery charge status.
Connect the interface through the included USB cable to a PC.
Do not disconnect the link to the computer during an update!
Make sure that the link between the transmier and computer
is operaonal.
Plug the other end of the adapter cable into the jack marked
"DATA" on the back of the transmier. Make sure that the orange
cable is plugged into the le, marked as "S", and the brown or
black cable on the right PIN marked with a "-". Do not apply
force.
The plug should be fully inserted.
Select "Auto download" or "Open file" to select between the cur-
rent firmware versions.
Select the file "mz-10_ ... bin" if you want to keep the default
firmware or to return to it or the file "MZ-10C_ ... bin" for the
copter version.
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner mz-10 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner mz-10 HOTT in the language / languages: German as an attachment in your email.

The manual is 25,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner mz-10 HOTT

Graupner mz-10 HOTT User Manual - English - 48 pages

Graupner mz-10 HOTT User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info