542407
89
Zoom out
Zoom in
Previous page
1/96
Next page
41 / 48
S1042_sh_V1
Later in the preparaons it is possible to adapt the servo direcon,
especially of CH1, to the habits of the student.
Preparing teacher and pupil transmitter
Teacher transmitter
Bring the mz-10 HoTT teacher transmier in "TEACHER" use mode
or program the other teacher transmier accordingly to its manual.
Pupil transmitter
Bring the mz-10 HoTT pupil transmier in "PUPIL" use mode or pro-
gram the other pupil transmier accordingly to its manual.
Note
The mz-10 HoTT transmier remains aer a conversion of the con-
trol mode, completely independently from the occurred seng of
the TRAINER switch and even aer switching on again the transmit-
ter, in the last selected use mode unl this will be changed.
Binding both transmitters
During the binding process, the distance between the two transmit-
ters should not be too small (up to 2m). However, always keep a suf-
ficient distance from the HoTT receiver already bound to the pupil
transmier. In case of too small distance because of the back chan-
nel redundancies it is possible that some errors are signaled.
Programming
Pupil transmitter
Push and hold the MODE buon on the switched on mz-10 HoTT
pupil transmier unl the first beep is emied or acvate the bind-
ing process accordingly to the other HoTT pupil transmier manual.
Teacher transmitter
Push and hold the MODE buon on
a mz-10 HoTT teacher transmit-
ter unl the rst beep is emied or acvate the binding process
accordingly to the other HoTT teacher transmier manual.
If the binding process is successful, both transmiers will indicate
each in its way the correct binding. By transmier type mz-10 HoTT
e.g. through the light up of the yellow BIND LED. Otherwise change
the distance and repeat the process.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner mz-10 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner mz-10 HOTT in the language / languages: German as an attachment in your email.

The manual is 25,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner mz-10 HOTT

Graupner mz-10 HOTT User Manual - English - 48 pages

Graupner mz-10 HOTT User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info