542407
86
Zoom out
Zoom in
Previous page
1/96
Next page
38 / 48
S1042_sh_V1
Programming step-by-step
1. Select the desired mode
2. Use the controls on the transmier to move the servos of the
model to the desired posions and hold them.
3. Press the MODE buon to the le of the LED field for three to
four seconds to store these items in the receiver.
Aer releasing the buon the status LED and the acousc signal
should indicate the actual transmier (power on) "control mode"
status.
4. Release the control elements.
5. Check the sengs by switching the transmier o.
If the servos do not move to the desired posions, repeat the
procedure.
Mode "Hold"
In case of transmission interrupons, all servos programmed to
"hold" remain at their posion which was last idenfied to be correct
unl a new, correct control signal is received by the receiver.
Programming step-by-step
1. Select the desired mode
2. Press the MODE buon for three to four seconds.
Aer releasing the buon
the status LED and the acousc signal
should indicate the actual transmier (power on) "control mode"
status.
3. Check the sengs by switching the transmier o.
If the servos do not remain in the most recently reached posi-
ons, repeat the procedure.
Fail-Safe "OFF"
With the "OFF" seng, over the course of a malfuncon, the receiver
stops transming control pulses for the relevant servo output The
receiver switches off of the pulse line in a manner of speaking.
Aenon
Analogue servos and many digital servos no longer experience resis-
tance to the ongoing control pressure aer control pulses stop and
are moved out of their posion at higher or lower speed.
Programming step-by-step
1. Select the desired mode
2. Press the MODE buon for three to four seconds.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner mz-10 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner mz-10 HOTT in the language / languages: German as an attachment in your email.

The manual is 25,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner mz-10 HOTT

Graupner mz-10 HOTT User Manual - English - 48 pages

Graupner mz-10 HOTT User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info