542407
83
Zoom out
Zoom in
Previous page
1/96
Next page
35 / 48
S1042_sh_V1
"2AILE"
For models with 2 aileron servos.
By aileron actuaon the servos connected to the outputs 2 and 5
work in parallel. The aileron trim acts on both servos.
Note
A conversion of "CH5" has in this case no eect.
"DELTA"
For delta and flying-wing model with one servo each wing.
The aileron and elevator control are carried out through the servos
connected to the channels 2 and 3. The mixer for ailerons and ele-
vator are actuated by the transmier. The aileron and elevator trim
acts on both servos.
"V-TAIL"
For models with V-tail and 1 or 2 aileron servo.
The elevator and rudder are controlled by two separately-arculated
rudders arranged in a V-shape connected to channel 3 and 4. The
mixer for rudder and elevator is actuated by the transmier. The
rudder and elevator trim acts on both servos.
The related acve seng will be indicated aer the transmier
switch-on for about ve seconds through the LED field on the trans-
mier.
Programming step-by-step
1. Switch on the transmier without programming connector.
These opons can be select
ed in each of the three operang
modes (NORMAL, TEACHER, PUPIL).
2. Press the arrow buon to the right of the LED field for at least 2
seconds.
Aer releasing, a short beep will be heard and the CH1 LED in the
"REVERSE" LED line flashes.
3. Press the arrow buon to the right of the LED field unl the LED
of the desired opon flashes.
Between the seven possible seng opons CH1 ... CH5, 2AILE
and DELTA is changed in the rotary process.
(The LEDs of opons CH1 ... CH5 flash red, the LEDs of opons
2AILE and DELTA are green.)
4. To change the status of the desired opon push the MODE but-
ton.
The blinking LED lights solid on.
5. Use the arrow buon to the right of the LED field to move to the
next opon and change the next opon.
6. You can always interrupt exit this menu by pushing for at least 2
seconds the arrow buon.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner mz-10 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner mz-10 HOTT in the language / languages: German as an attachment in your email.

The manual is 25,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner mz-10 HOTT

Graupner mz-10 HOTT User Manual - English - 48 pages

Graupner mz-10 HOTT User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info