467107
163
Zoom out
Zoom in
Previous page
1/200
Next page
163
Program description: Info display
Time
RFID
firmware ver.
date
time
SD-CARD
(FRI)
1.11
0MB
ABCDEF12
2011/03/11
11:22:33s
If necessary, you can select this line, and the minutes
field, using the arrow buttons of the left or right-hand
touch-key. A brief press on the central SET button of the
right-hand touch-key activates the corresponding value
field, and you can then adjust the hours or minutes
using the arrow buttons of the right-hand touch-key. A
further brief press on the central SET button of the right-
hand touch-key concludes the entry process.
Note that the seconds display cannot be set directly;
instead it can be reset to “00” with a touch of the central
SET button of the right-hand touch-key.
Notes:
The date and time of day can also be set using the •
PC program available for the corresponding product
on the Internet at www.graupner.de; this requires that
the transmitter should be connected to a PC in the
appropriate manner.
The date and time are protected from data loss due •
to power failure - for example, when the battery is
swapped - by a user-replaceable buffer battery.
SD card
RFID
firmware ver.
date
time
SD-CARD
1.234
2048Mb
ABCDEF12
2012/03/01(THU)
11:22:33s
This line displays the storage capacity in MB of a
memory card installed in the transmitter.
Depending on the memory capacity of the micro-SD
or micro-SDHC memory card fitted in the transmitter,
it may take several minutes for the display to show the
correct value after you switch the transmitter on.
available
firmware ver.
date
time
SD-CARD
1.234
2048Mb
2012/03/01(THU)
11:22:33s
available 1234Mb
Display of the available memory in MB.
As already mentioned, it may take a certain amount of
time for the available memory to be displayed after you
switch the transmitter on, depending on the total capac-
ity of the installed memory card.
The next line down displays the available memory in
relation to the total memory capacity:
date
time
SD-CARD
2048Mb
2012/03/01(THU)
11:22:33s
available 1234Mb
60%
As already mentioned, it may take a certain amount of
time for the available memory to be displayed after you
switch the transmitter on, depending on the total capac-
ity of the installed memory card.
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info