467107

Graupner MX-16 HoTT Manual

113
Zoom out
Zoom in
Previous page
1/200
Next page
113
Program description: wing mixers – fixed-wing model
flap aile (Flap aileron)
This mixer causes a variable proportion of the flap signal
to be mixed in with the aileron channels 2 and 5 so that
the ailerons follow the movement of the flaps, albeit
normally with a smaller deflection.
The adjustment range is +/- 150%. For this mixer the
“usual” settings are around 50%.
Simultaneously pressing the  or  buttons of the
right-hand touch-key (CLEAR) resets an altered value
to 0%.
Note:
If you assign a transmitter control to inputs 5 and 6 in
the “Transmitter control settings” menu for adjust-
ing the flap positions, then you should leave the value
for this mixer at 0%. See the notes on page 109 in this
regard.
diff red (Differential reduction)
The problem of reduced aileron response in the but-
terfly configuration has been mentioned earlier: if aileron
differential is employed, the aileron response on the
landing approach may be adversely affected through
the extreme “up” deflection of the ailerons, permitting
virtually no further up-movement; on the other hand
the “down” travel has already been reduced by the
programmed differential setting. The overall result is
significantly reduced aileron response compared with
the normal setting of the control surfaces.
In this case you really should use “differential reduc-
tion” if at all possible. This reduces the degree of aileron
differential when you invoke the butterfly setting using
the airbrake stick. Differential is reduced progressively,
or even eliminated altogether, as the airbrake stick is
moved towards its end-point.
A value of 0% at this point means that the full pro-
grammed aileron differential is retained. A value of 100%
means that the aileron differential is completely elimi-
nated at the maximum butterfly setting, i. e. when the
airbrakes and other glide path control surfaces are fully
extended. If you set a value above 100%, the aileron
differential is eliminated even before full travel of the
airbrake stick is reached.
The adjustment range is 0 to 150%.
Simultaneously pressing the  or  buttons of the
right-hand touch-key (CLEAR) resets an altered value
to 0%.
… 113 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info