467107

Graupner MX-16 HoTT Manual

74
Zoom out
Zoom in
Previous page
1/200
Next page
74
Program description: base settings - fixed-wing model
Base settings
Basic model-specific settings for fixed-wing model aircraft
Before you start programming specific parameters,
some basic settings must be entered which apply only
to the currently active model memory. Select the “Base
settings” (basic model settings) menu using the arrow
buttons of the left or right-hand touch-key, then touch the
central SET button of the right-hand touch-key:
mod.mem.
servo set.
D/R expo
wing mixer
base sett.
contr set.
phase trim
free mixer
servo disp basic sett
fail-safe telemetry
model name
mod name
stick mode
CH8 delay
motor at C1
1
yes
no
tail type normal
Touch the SET button of the right-hand touch-key to
move to the next screen page, where you can select
characters to assemble the model name. You can enter
up to nine characters to define a model name:
0123456789
PQRSTUVWXYZ
model name
?
:
;
ABCDEFGHIJKLMNO
GRAUB
Use the arrow buttons of the left-hand touch-key to
select the desired character, then move to the next posi-
tion in the name by pressing the arrow button of the
right-hand touch-key, or its central SET button, where
you can select the next character.
Simultaneously pressing the or  buttons of the
right-hand touch-key (CLEAR) inserts a space at that
point.
You can move to any character position within the input
field using the  buttons of the right-hand touch-key.
Touching the central ESC button of the left-hand touch-
key returns you to the previous menu page.
The model name entered in this way appears in the
basic display, and also in the sub-menus of the “Model
memory” menu.
stick mode
“MODE 2” (Throttle at left stick)
“MODE 3” (Throttle at right stick) “MODE 4” (Throttle at left stick)
“MODE 1” (Throttle at right stick)
elev. down
elev. up
left rudder
right rudder
full throttle
idle
left aileron
right aileron
full throttle
left rudder
right rudder
idle
elev. down
elev. up
left aileron
right aileron
elev. down
elev. up
left aileron
right aileron
Motor Vollgas
idle
left rudder
right rudder
full throttle
idle
left aileron
right aileron
elev. down
elev. up
left rudder
right rudder
Basically there are four possible ways of arranging the
principal control functions of a fixed-wing model on the
two dual-axis sticks: the primary functions are aileron,
elevator, rudder and throttle (or airbrakes). Which of
these options you select depends on your individual
preferences and flying style.
Use the arrow buttons  of the left or right-hand
touch-key to move to the “Stick mode” line. You will see
the select field framed:
mod name
stick mode
CH8 delay
motor at C1
1
yes
no
tail type normal
GRAUBELE
Briefly press the SET button to highlight the current stick
mode (black background). Now use the arrow buttons
of the right-hand touch-key to select one of the options
1 to 4.
Simultaneously pressing the  buttons or the 
buttons of the right-hand touch-key (CLEAR) returns the
display to stick mode “1”.
Touching the SET button again disables the select field
once more, so that you can switch lines.
motor at C1
mod name
stick mode
CH8 delay
motor at C1
1
yes
no
tail type normal
GRAUBELE
When you select “motor at C1” using the arrow buttons
 of the left or right-hand touch-key, you will see the
corresponding input field framed. Touch the central SET
button of the right-hand touch-key to highlight the cur-
rent setting. Now use the arrow buttons of the right-hand
touch-key to switch between the four possible options:
… 74 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info