467107

Graupner MX-16 HoTT Manual

64
Zoom out
Zoom in
Previous page
1/200
Next page
64
Model helicopters
Model helicopters
Collective
Pitch Curve
Channel 1
Throttle
C
h
a
n
n
e
l
1
T
a
i
l
R
o
t
o
r
The continued development of model helicopters and
helicopter components, such as gyros, speed governors,
rotor blades etc., has led to the current position where
helicopters are capable of sophisticated 3-D aerobatics.
In contrast, if you are a beginner to helicopter flying, you
need a simple set-up so that you can quickly get started
on the initial stages of hovering practice, and then
gradually learn to exploit all the options provided by the
mx-16 HoTT.
The helicopter program of the mx-16 HoTT can cope
with all current model helicopters equipped with 1 … 4
servos for collective pitch control, entirely regardless of
whether they are powered by a fuel-driven or electric
motor.
Each model memory can include three flight phases
plus auto-rotation.
Two timers are constantly included in the basic screen
display. At the same time the period which has elapsed
since the last charge process is also displayed.
You can return to the correct idle position for the digital
Ch 1 trim simply by pressing a button.
“Dual Rate” and “Exponential” are available for roll,
pitch-axis and tail rotor; they can be coupled together,
and programmed to provide two settings.
All the transmitter controls (CTRL) and switches (SW)
can be assigned to inputs 5 … 8 in virtually any order.
This is carried out in the “Transmitter control settings”
menu.
In addition to three linear mixers, which can be assigned
to any functions and can also be switched on and off,
the “Helicopter mixers” menu provides five-point curves
for the collective pitch, throttle and tail rotor mixers,
variable separately for each flight phase; these provide
non-linear mixer characteristics.
1. Collective pitch
2. Ch 1 throttle
3. Ch 1 tail rotor
Such advanced features are not needed by the begin-
ner, who will initially simply set the hover point to coin-
cide with the centre point of the stick arc, and adjust the
collective pitch travel as required.
Moreover the “Heli mixers” menu offers two additional
set-up options in the lines “Gyro” and “Inp8”, plus a
“swashplate limiter”.
The mixer inputs for collective pitch, roll and pitch-axis
can then be adjusted in the “Swashplate mixers” menu.
The throttle limit function in the “Transmitter control
settings” menu provides an effective means of starting
the motor in any flight phase. By default the proportional
rotary control CTRL 7 is assigned to this input, and this
control function determines the maximum throttle servo
position, i. e. the trim lever controls the motor over the
idle range. Only when this rotary knob is turned in the di-
rection of full-throttle do the programmed throttle curves
take effect. If you have set up the two timers, they also
start recording the flight time automatically at this point.
See page 99 for more information on this.
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info