467107
39
Zoom out
Zoom in
Previous page
1/200
Next page
39
Using the transmitter for the first time - Updating the firmware
ently using them incorrectly. This means that any
servos connected to these channels will simply
“stay put” at their centre position until a trans-
mitter control is assigned to the channel in ques-
tion. For the same reason virtually all the mixers
are inactive by default. For more details of this
please refer to page 86 (fixed-wing model) or 88
(helicopter).
The basic procedure for programming a new •
model memory can be found on page 66, and in
the programming examples starting on page 164.
When switching on, binding or setting up the ra-•
dio control system, please ensure at all times
that the transmitter aerial is an adequate distance
from the receiver aerials. If the transmitter aeri-
al is too close to the receiver aerials, the receiver
will be swamped, and the red LED on the receiv-
er will begin to glow. At the same time the down-
link channel will stop working. As a result the
field strength bars on the transmitter screen are
replaced by “x”, and the receiver battery voltage
is displayed as 0.0 V. At the same time the radio
control system switches to Fail-Safe mode, see
page 136, i.e. the servos remain fixed in their cur-
rent position for as long as reception is not pos-
sible, and until a new, valid signal is picked up.
If this should happen, simply increase the dis-
tance between transmitter and receiver until the
displays revert to “normal”.
Updating the transmitter firmware
The transmitter firmware can be updated at the owner’s
risk using either of two methods:
As described under “FIRMWARE UPDATE / Chang-•
ing the screen language” in the section entitled
Hidden mode on page 27.
As described in the next section, using the five-pin •
mini-USB port on the back of the transmitter, in
conjunction with a PC or laptop running Windows XP,
Vista or 7.
Current software and information can be found in the
Download section for the corresponding product at www.
graupner.de.
Note:
Once you have registered your transmitter at https://
www.graupner.de/en/service/product_registration you
will automatically be informed of new updates by e-mail
as they become available.
The easiest method of accessing the “corresponding”
product page, as mentioned above, is to enter www.
graupner.de in the address line of your Internet browser,
and then press the ENTER button of your PC or laptop:
This takes you to the home page of the Graupner com-
pany website, where you will find an input field at top
right below the title “Suchen / Search”:
Place the mouse pointer in this field and then enter a
search term, for example, the article number printed on
the type placard on the back of your transmitter:
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info