747992
77
Zoom out
Zoom in
Previous page
1/80
Next page
77 / 80
33028_mc_28_Teil2_jh
Update through USB port
Download the software package from the Internet, and unzip it on
your computer. Connect your switched off transmitter with your PC,
by using the included USB cable, supplied with the package content.
Plug the USB cable directly into the micro USB port of the transmit-
ter and the other end to a free port in your computer. All other infor-
mation can be found in the instructions that come in the software
package.
Problems during firmware update
Problem: POWER switch without function
If a firmware update for the transmitter is unsuccessful or the trans-
mitter program freezes and the transmitter cannot be turned off
using the "POWER" switch, then remove the transmitter's battery
after setting the switch to "POWER = OFF" position, or pull the plug
from the transmitter battery, reconnect it after few seconds and
leave the transmitter switched OFF.
Download the update file from internet and save it in the "RECOV-
ERY" folder in your SD card. Then change the file name to "R280.bin".
Insert the SD card in the transmitter.
Push and hold the Ctl 5 and Ctl 6 buttons at the same time to the top
and push the POWER button.
Now push and hold to the lower side within 2 - 3 seconds the Ctl 5
and Ctl 6 for about 10 seconds.
Wait at least 30 seconds. In the display no image will be shown.
During the update the transmitter cannot be switched on.
After 30 seconds the transmitter switches on.
Declaration of conformity
S1033 / S1036 / 33028 - mc-26 / mc-28 / mc-28 4D
Graupner/SJ declares that the product is conform to EU norms.
EMV 2004/108/EC:
EN 301 489-1 V1.9.2
EN 301 489-17 V2.1.1
EN 62479:2010
LVD 2006/95/EC:
EN 60950-1 + A11 + A1 + A12 + A2:2013
R&TTE 1999/5/EC:
EN 300 328 V1.8.1
EN 62311:2008
FCC ID: SNL-1600710 / SNL-1600770
IC ID: 20961-1600770 / 20961-16007100
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC26 in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC26

Graupner MC26 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info