747992
21
Zoom out
Zoom in
Previous page
1/80
Next page
21 / 80
33028_mc_28_Teil2_jh
Receiver binding
You can bind two receivers to the transmitter. The two bound receiv-
ers can also be managed in binding option. You can split the control
channels of the receivers in the "Receiver output".
Binding process
Move to the "N/A" field near the "HoTT" field with the selection but-
tons. Select your HoTT receivers while in binding mode. The binding
method is dependent on the type of receiver (see the following
table).
1. Set the receiver in the binding mode
1st binding
method
Push and hold the binding button
Receiver type GR-12
green LED on
= bound
GR-12L
red LED off =
bound
GR-18/24
green LED on
= bound
2nd binding
method
Push and hold the button until the LED blinks
red/green
Receiver type GR-16 / 24 / 32 - green LED on = bound
3rd binding
method
No binding button, the receiver enters auto-
matically the binding mode after switching on
Receiver type Gr-10C, GR-12 SC / SH
red LED off = bound
2. Now tap on the SET button; a "BIND" info window will appear.
If the binding process has been successful, “bound” will appear in
the left field. The identification of the receiver (e.g. E12 = GR-24)
appears in the line "Receiver output" under the "bound" field. BD1
and BD2 is displayed in the lowest line of the display. The meaning
of the message will be explained in the "Telemetry menu" section.
Note
If the binding process was not successful, verify the following condi-
tions:
Is the distance between transmitter and receiver at least 2 ft?
Is the power source of the receiver OK?
Is the polarity of the power supply correct?
Was the binding button correctly pushed?
If you want to bind a second receiver, then proceed as described
above. Move to the correct "n/v" field.
Mod. name
Stick mode 1
n/a
Base setup model
GRAUBELE
Rcv Ch Map n/a
Module HoTT n/a
n/a
Mod. name
Stick mode 1
n/a
Base setup model
bind
BD1
GRAUBELE
BD2
Rcv Ch Map R12 n/a
Module HoTT
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC26 in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC26

Graupner MC26 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info