747992
9
Zoom out
Zoom in
Previous page
1/80
Next page
9 / 80
33028_mc_28_Teil2_jh
Definition of terms
Control function
A control function is the signal for a specific control function. The
signal of a control function can be transmitted directly into one con-
trol channel or through a mixer to several control channels. The con-
trol function includes the influence of the mechanical control path
on the corresponding servo. This can be spread or concentrated and
modified from linear to highly exponential.
Controls
A "control" is the function element that the pilot can operate directly
in the transmitter. The controls connected to the servos, ESC etc. will
be controlled by the receiver.
Control channel
The term control channel is used if a signal contains all control infor-
mation necessary for a particular servo , directly from the control or
indirectly via a mixer.
Mixer
The transmitter software contains a variety of mixing functions.
These allow a control function to influence several control channels
and several servos. Several control function can influence control
channel (one servo).
Switch
The series of toggle switches can be included in the control program-
ming. The switches are generally intended to switch program options
such as to start and stop the timers, turn mixers on and off, etc. Each
switche can be assigned any number of functions.
Control switch
In these software switches, labelled with "G1 ... G8", the switching
point within the control travel can be set by simply pushing a button.
Logical switch
Two switches, controls and logical switches or the combination of
the three can be interconnected in an "AND" or "OR" switch. A total
amount of 8 logical switches "L1 … L8" can be programmed.
Fix switch FXI and FX
This kind of switch always turns a function on or off. You can also
assign to a control function a fix input signal, e.g. FX = +100 % and
FXi = -100 %.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC26 in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC26

Graupner MC26 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info