Manual Graupner MC18 (page 44 of 56) (English)

30121

Zoom out

Zoom in

1/56

Programming Examples for Fixed-Wing Models

In case you have become slightly confused by the

unusually large number of functions offered in the

preceding chapters of these instructions, the following

pages show you by way of example, how a practical

adjustment of a model can be programmed in a

minimum of time. In doing so, the essential functions

will be activated, while the “deluxe” options meant for

the competition pilot will not, initially, be taken into

consideration. In the following chapters this basic

program will the be expanded by additional options,

followed by a few examples for the Profi’s bag of

tricks. Here the basic principles of computer R/C will

become clear.

From the extensive range of functions you select only

those which are actually required and forget the rest

of them. If, in the course of time, you need more all

you have to do is activate additional functions.

Be sure to duplicate the following examples step by

step, so you won’t forget or overlook anything. In this

manner you’ll actually get automatically familiar with

your R/C equipment and won’t consider it nearly as

complicated as it may have appeared at first glance.

1.) Preparations

You have installed the module into the transmitter as

per the instructions. Close the case of the transmitter

again and turned the transmitter on. The display will

read:

Depending on what kind of module had been installed

previously in your transmitter the display may show

another model number or another modulation mode.

2.) Executing RESET (Important)

Call model memory 1 and clear it completely. To do

this input:

ENTER 5 6 ENTER 1 CLEAR ENTER

If the transmitter had previously been switched to

PCM you now have the basic position of the display

again. If not, the request will appear to turn the

transmitter off. This is because it has been switched

to the default position of PCM modulation. Comply

with the request and then turn it on again a moment

later, thereafter you will be in the basic position.

For safety’s sake, so you won’t forget it later, execute

a reset (right now) on all the remainder of the model

memories. To do this, input:

ENTER 5 6 ENTER 2 CLEAR ENTER

ENTER 5 6 ENTER 3 CLEAR ENTER

…

ENTER 5 6 ENTER 7 CLEAR ENTER

…

( ENTER 5 6 ENTER 3 0 CLEAR ENTER )

This procedure needs only to be performed once in

order to positively delete any programming parts and

data which may have been stored in the transmitter

memory by an earlier used module, and could still be

stored. These program fragments may cause a

malfunction if not deleted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC18 in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC18

Graupner MC18 User Manual - German - 188 pages

Graupner MC18 User Manual - French - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner MC18 Manual

Product: