30121

Graupner MC18 Manual

35
Zoom out
Zoom in
Previous page
1/56
Next page
Code 76 Code 74
Servo Test Servo Position
Testing Servos 1 – 9 Display of Servo Position
35
When the lock has been released the combination of
digits can be changed at any time by calling code 99
and entering a new combination. To remove the lock
completely instead of entering a new combination, the
CLEAR key has to be pressed instead of entering a
combination. The input has to be terminated by
pressing the ENTER key.
For safety’s sake the lock has to be removed prior to
starting with flight operations! To this end, proceed as
follows:
Turn on the transmitter
Input the correct combination of digits
Press the ENTER key
Input the correct combination of digits again
Call code 99
Press keys ENTER CLEAR ENTER
Please ensure you remember the combination you
set, or you will have to return the transmitter to
Graupner Service for decoding.
m
c
-
1
8
E
M
O
D
E
L
1
E
N
T
E
R
=
S
E
R
V
O
T
E
S
T
To check all servos for proper function, check them
one after another by executing full deflections in both
directions, starting from the neutral position. After
calling code 76, the test program will be executed in
an endless loop until interrupted by pressing the
ENTER key. In this way, the receiver can be
checked over a longer period.
S
E
R
V
O
P
O
S
.
p
u
s
h
c
h
k
e
y
1
-
10
The actual position of each servo can be shown
exactly with the aid of code 74. In this manner, the
interaction of different mixers on a specific servo can
be determined with accuracy, and the operation of
throw reduction can be controlled. Battery fail-safe
(code 78) can also be checked.
For the simulation of battery fail-safe position relying
on the menu. The operating element for channel 1 or
channel 8 is adjusted to the percentage value set
using code 78, and the control surface throw checked
at the servo after calling code 74.
After calling the request for the selection of the control
channel to be checked will appear in the display. To
select the channel, use keys 1… 9 and INC (for
channel 10). After entering the channel number, the
lower line of the display will indicate after the channel
number, the exact servo position within a range of
±150% of the servo throw in either direction, with 0%
corresponding to the neutral position. Using keys 1…
9 and INC , other control channels can be displayed.
To terminate the display of servo position, press the
ENTER key.
The sole exception is the adjustable servo speed of
code 79 can not be displayed.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC18 in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC18

Graupner MC18 User Manual - German - 188 pages

Graupner MC18 User Manual - French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info