30117
96
Zoom out
Zoom in
Previous page
1/104
Next page
Teach – Pupil System
with Fibre-Optic Cable
96 Supplement
The teacher and pupil transmitters may be
operated only in the PPM mode.
For connection between transmitter types
D 14, FM 414, FM 4014, FM 6014,
FM 6014 / PCM 18, mc-14, mc-15, mc-16,
mc-16/20, mc-17, mc-18 and mc-20.
With this option and operation of the
integrated momentary switch allows all
control functions of the teacher’s
transmitter to be transferred to the pupil’s
transmitter.
It is necessary that the pupil’s transmitter
contains all the same programming, mixing
and coupling functions as the teacher’s
transmitter as this data is not transferred.
For the installation of the teacher-pupil
training system in teacher transmitter, it is
required to drill a further hole into the right
or left facia plate using a 6 mm drill. Please
you make sure that no metal debris enters
the inside the transmitter – there is a risk
of short circuits!
Function Notes
Switch the transmitters into PPM mode.
Plug M of the teacher-pupil cable into
teacher’s transmitter, and insert plug S into
the pupil’s transmitter. Both the teacher
and pupil transmitters, must be equipped
with suitable transmitter battery.
The HF radiation takes place from the
teacher’s transmitter and an appropriate
crystal must be the installed. The pupil’s
transmitter needs no HF module
The change-over of control from teacher to
pupil takes place by the teacher holding
the momentary switch on his transmitter.
The teacher need only release the switch
to regain control of the model, resume
normal flight attitude before handing
control back to the pupil again.
Replacement Parts
Part No 3290.4 Fibre-optic cable for
teacher-pupil system.
Module for additional pupil transmitters
Part No. 3290.3
Installation in the Teacher’s Transmitter
After installation of the teacher printed
circuit board in teacher transmitter (board
with switch and socket).
Disconnect the plug on the transmitter
board from the HF Module and plug this
into the socket on the teacher PCB.
Connect the lead soldered to the teacher
PCB to the HF Module.
Troubleshooting
:
The interface is not correctly
connected to the HF Module.
Pupil’s transmitters is not switched on.
Pupil’s transmitters is not in PPM
mode.
The fibre-optic cable is damaged.
The optical cable has worked loose
from one of the sockets. In this case
release the clamping device in the
plug by pressing down as shown and
push the fibre-optic cable back in.
Installation in the Pupil’s Transmitter
After installation of the board, unplug the
HF Module lead at the transmitter board
and connect the lead from the module in
it’s place.
Opto-electrical Teach-Pupil System with Fibre-optic cable
Part No.
3290
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC16 in the language / languages: English as an attachment in your email.

The manual is 16,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC16

Graupner MC16 User Manual - German - 68 pages

Graupner MC16 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info