30117
40
Zoom out
Zoom in
Previous page
1/104
Next page
Mixer for Models with V-Tails Spoiler Elevator Mixer
(access via Set-Up Menu) (access via Set-Up Menu)
40 Fixed Wing Models
V-TAIL MIXER SPOILER
ELEVATOR MIXER
For models with a V-tail the functions of elevator and
rudder must be mixed so with one another so that
during elevator movement both surfaces are moved
up or down in the same direction, and during rudder
control the surfaces move in opposite directions , i.e.
one surface upward and the other downward. The
"VTL" Program contains the appropriate mixer, to
control surfaces connected to separate servos. The
function is activated using the INC / DEC buttons.
Servos connected to outputs 3 and 4 of the receiver
are automatically coupled with one another. The mix
relationship is changed using the dual- rate setting,
see page 20, where Ch4 changes the rudder effect
and Ch3 the elevator effect.
It is usually necessary to adjust the elevator when
altering the spoiler setting due to the change in lift
created by the wing.
This codes allows the elevator to be adjusted to suit
the position of the spoiler stick (control function 1)
during the landing approach, within the range of 0 to
±125%.
The mix proportion is determined using the code "S-
E" and pressing the INC / DEC buttons.
Pressing the CH SEL button switches to the offset
setting:
The mixer must be programmed, which position of
the spoiler control (throttle / spoiler control stick 1)
corresponds to normal flight. This would be the
position with the spoilers retracted and therefore the
neutral position of the elevator. To set this offset, the
control is moved to the appropriate position and the
CLEAR button is pressed. The offset, the deviation
from the control centre position, is indicated in the
display.
Using a switch connected to socket 7 of the
transmitter board this function can be switched off.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC16 in the language / languages: English as an attachment in your email.

The manual is 16,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC16

Graupner MC16 User Manual - German - 68 pages

Graupner MC16 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info