30117
18
Zoom out
Zoom in
Previous page
1/104
Next page
Set-Up Menu
18 Set-Up Menu
General notes
You have concluded the basic programming of the
transmitter. If no special functions, like servo travel
adjustment, servo reversal, mixer and coupling
function etc., are necessary, you can now already
put your model into operation. Look up the basic
outline of the multi-function finished programs on
page 26 and 27, or test them using the detailed
descriptions for the model type used.
Model Type See page
Standard (FL) 28
Unifly (UN) 34
F3B/Butterfly (Fb) 42
Aerobatic (AC) 52
Helicopter (HE) 62
The modelling beginner is recommended to choose
models with control over rudders and elevators, and
if necessary also over Ailerons. Select the standard
model type "FL" in the system menu.
Flow charts and block diagrams
Those the individual sections placed in front
flowcharts
contain the available in each case codes.
(see page 19).
From the block diagrams
it can be inferred, in which
place in the signal flow from the signal of the
controls, i.e. can be influenced and changed
between the control functions 1 – 8 and the receiver
connections. For clarity the same designations and
abbreviations were used as with respect to the
descriptions of code. See the diagram below.
The controls at the transmitter are symbolically
explained by the character
. The control sticks 1 –
4 additionally possess a (electronic) trim.
Since these are not influenced by the dual rate and
exponential function, their signal process is drawn
separately. The cross connections show, which
channels are linked together with certain finished
programs. For the freely programmable mixers, see
page 22 and 23, of importance are the "output point"
and the " input point ". The program in the
appropriate place tests, at which point in the signal
flow a signal is to be measured (outputs) and which
channel it is to affect (inputs).
Before the signal finally arrives at the receiver or at
the servo, it can still be influenced by the servo
travel, reversal and neutral adjustment.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC16 in the language / languages: English as an attachment in your email.

The manual is 16,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC16

Graupner MC16 User Manual - German - 68 pages

Graupner MC16 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info