467111
337
Zoom out
Zoom in
Previous page
1/345
Next page
337
Programming examples - Helicopter models
As a reminder:
The autorotation phase has absolute
precedence.
Therefore, move the autorotation switch back again
then put the selected switch, in the example the
three-stage switch connected to switch plug-in loca-
tions 6 and 7, initially to one of its limit positions. Now
use the selection keys to change to the bottom right
and activate this entry field:
P H A S E ASSIGNMENT
prior.
C
combi
AB D E F
26 7
1 Normal
Now use the selection keys to select the desired flight
phase for this for example "2 Hover" …
P H A S E ASSIGNMENT
prior.
C
combi
AB D E F
26 7
2 Hover
… and confirm this selection with a brief tap on the
centre SET key of the right touch pad or go ahead
and put the switch into its other limit position and
define the name for this new switch position, such as
«3 Speed».
P H A S E ASSIGNMENT
prior.
C
combi
AB D E F
26 7
3 Speed
The switch's middle position then receives the name
"1 Normal":
P H A S E ASSIGNMENT
Prior.
C
combi
AB D E F
26 7
1 Normal
Note:
Exchanged or different name assignments for
the three switch positions are, of course, also
possible.
The model settings made before the assignment of
a phase switch are now in the flight phase "Normal".
This is the phase which is called after the above defi-
nition in the switch centre position.
This normal setting, which was already tested in
flight, can be copied to a different flight phase so that
flying can take place in the same manner in every
phase at first. For this purpose, use the menu …
»Copy / Erase« (page 74)
Copy flight phase
Erase model
Copy model –> model
Export to SD
Import from SD =>
With the operation of the flight phases, it is possible
to carry out changes in the phase-dependent menu
for each individual phase. Since the mc-32 HoTT
system has digital trimming, in addition to the flight-
phase dependent menu settings in the helicopter
program, the trim positions of roll, nick and tail rotor
stick can also be selected for storage on a flight-
phase dependent basis, see »Stick mode« menu,
page 116:
0:00h
Stop watch
Flight tim
K78
0:00.0
4.1V
0:00.0
00
0
0
0:00h
M
V
H-J Sandbrunner
Normal
#02
Starlet
RX VOLT:4.9V
Enhancement recommendation: Rotational speed
regulator
At some point in time you may want to install a ro-
tational speed regulator in the helicopter, such as
mc-Heli-Control, in order to be able to fly with speeds
automatically kept at a constant. In the process, it is
logical to couple the individual rotational speeds with
the flight phases so that further additional adjust-
ments are possible.
It is mandatory for the transmitter-side programming
that the rotational speed regulator was installed and
337


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info