Manual Graupner MC 32 HOTT (page 310 of 345) (English)

467111

310

Zoom out

Zoom in

1/345

310 Programming examples - Using ight phases

3rd Step

In order to not have to carry out all previously made

settings for the model in the "new" ﬂight phase from

the ground up, we recommend ﬁrst copying the al-

ready tested programming of the ﬂight phase "Nor-

mal" to the other ﬂight phases. This is carried out in

the menu …

»Copy / Erase« (page 74)

Copy flight phase

Erase model

Copy model –> model

Export to SD

Import from SD =>



Here, select the "Copy ﬂight phase" menu item with

the selection keys then brieﬂy tap the centre SET key

of the right touch pad.

In the window which now appears, "Copy from

phase", "1 Normal" is selected …

Copy from phase:

5=>

normal Thermal

Speed Launch

… and a subsequent brief tap on the centre SET key

of the right touch pad will change the display to "Copy

to phase". Now the target is to be selected (initially

"2 Thermal") and conﬁrmed by another tap on the

centre SET key of the right touch pad. After conﬁrma-

tion of the subsequent safety query, all settings are

copied according to the selection.

Proceed in the same manner with the other two

phases ("1 Normal" to "3 Speed" and "1 Normal" to

"4 Start").

4th Step

Now three or four phases are programmed, the

settings are also copied and there is even a "soft"

transfer, but … there are still no ﬂight-phase speciﬁc

settings.

Now, if applicable, in order to adapt the ﬂap positions

to the different requirements of the individual ﬂight

phases, in the menu …

»Phase trim« (page 162)

Starting from the “normal” ﬂight phase, switch to one

of the other ﬂight phases, whose name will appear at

bottom left in accordance with the switch position; for

example, the «Thermal» phase.

Now move the marker frame to the “ AIL ” column,

and enter any settings for the ailerons which dif-

fer from the “normal” ﬂight phase. Both positive and

negative changes to travel are possible. Enter these

settings separately for each ﬂight phase, for example:



Normal 0%

Thermal

AI WK WK2

Thermal

Speed

Launch

-7%

0% 0%

+5%

0% 0%

QR2

-11%

5th Step

Any necessary phase-speciﬁc trimming of the eleva-

tor is made with the help of the digital trimming of the

elevator stick. This requires that you have at least set

the elevator trimming to “Phase” in the »Stick mode«

menu.

Alternatively, these settings can also be made in the

»Phase trim« menu …



Normal 0%

Thermal

AI WK WK2

Thermal

Speed

Launch

0% 0%

QR2

Important note:

This is true provided that you have left at

least the elevator trim at the standard

“Global/Phase” in the line RF of the »Stick

mode« setting menu (see page 114) as shown at

the start of the programming example. Alterna-

tively, these settings can also be made in the

»Phase trim« menu …

6th Step

In the menu …

»Wing mixers« (beginning page 172)

… the ﬂight phase name of the newly activated ﬂight

phase appears at the bottom edge of the display. If

the switch position is now changed, the name of the

ﬂight phase selected with the switch appears, but

with the previously copied settings of the ﬂight phase

"Normal". Here you set your values phase-speciﬁcally

for the aileron differentiation, the share of the mixture

of transverse to side, and if applicable, also a mixture

of altitude to transverse. (The latter increases the agil-

ity over the transverse axis when "Turning".)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner MC 32 HOTT Manual

Product: