467111
269
Zoom out
Zoom in
Previous page
1/345
Next page
269
Program description - Ring limiter
Column, "Output"
The three ring limiters are pre-assigned to receiver
outputs 3/4, 9/10 and 11/12 by default, whereby the
outputs in column "X" are for the forward/reverse
function and the outputs in column "Y" are for the left/
right function. However, this preset combination of
receiver outputs can be replaced as necessary by
any other combination at any time. This is essentially
done in the same manner as described previously
under "Input", for example:
RING LIMIT
4
9
SET
4
Input
3
3
3
3
X Y
4
10
6
X
Output
Y
OFF
OFF
OFF
4
7
Note:
Watch out for undesirable overlaps if you use
one of the outputs within a mixer.
Column, "SET"
The SET column is used to determine just which of
the ring limiters is to be "OFF" and which are to be
"ON", i. e. active. Use the selection keys on the left
or right touch pad to move the marker frame to the
desired value field in the SET column then briefly tap
the centre SET key of the right touch pad:
RING LIMIT
4
9
SET
4
Input
3
3
3
3
X Y
4
10
6
X
Output
Y
OFF
OFF
4
7OFF
In the value field now displayed in inverse video,
make a choice between the two options, "ON" and
"OFF", with the  or  selection keys then con-
clude the entry with a brief tap on the centre ESC key
of the left touch pad or on the centre SET key of the
right touch pad.
A tap on the  or  keys of the right touch pad
at the same time (CLEAR) will reset the active value
field back to its "OFF" default value.
Column
RING LIMIT
4
9
SET
4
Input
3
3
3
3
X Y
4
10
6
X
Output
Y
ON
ON
4
7ON
Following a selection of one of the three lines with
the selection keys, switch to the settings page for the
selected ring limiter (1 … 3) with a brief tap on the
centre SET key of the right touch pad.
0%
Ring Limit 1
max-X
0%
100% 100%
CH 4
VSP OUT X VSP OUT Y
0% 0%
CH 3
If, however, the small diamond at the centre of the
circle in the figure above (which represents the cur-
rent stick position) is not visible …
0%
Ring Limit 1
max-X
0%
100% 100%
CH 4
VSP OUT X VSP OUT Y
0% 0%
CH 3
… then the respective ring limiter is still switched
"OFF". In this case, switch back to the previous page
with a brief tap on the centre ESC key of the left
touch pad then switch the respective ring limiter "ON"
as previously described.
Programming procedure
The two upper value fields labeled at the bottom left
of the display as "max-X" or "max-Y", depending on
the position of the marker frame are used to specify
separate settings for each of the two control func-
tions, "left/right" and "forward/reverse" within a range
of 25 …
269


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info