467111

Graupner MC 32 HOTT Manual

53
Zoom out
Zoom in
Previous page
1/345
Next page
53
Reciver initialization
When also the default set enclosed receiver GR-12L
only the red LED lights up for about 3 seconds, then
goes out for about 3 seconds and starts to glow red
constant after this break.
Release the button once the red LED goes out.
If the reset is performed with an unbound receiver, a
binding process can be initiated immediately after-
wards.
Please note the following:
A receiver RESET will cause ALL
receiver settings, except for binding
information, to return to their factory
settings.
Therefore if a RESET is triggered uninten-
tionally, any custom settings that had been
present in the receiver before the reset will
have to be established again by way of the
Telemetry menu.
A deliberate RESET is recommended, es-
pecially if a receiver is to be "transferred"
into another model. This is a rather simple
method to eliminate settings which are no
longer applicable.
Receiver firmware updates
Receiver firmware updates are made by way of the
connector located on the side of the receiver and
the help of a PC running under Windows XP, Vista or
Windows 7 or 8. The included USB interface cable
No.7168.6 along with adapter cable, No.7168.6A are
needed to run an update. The programs and files also
needed can be found as a complete packet in Internet
on the Graupner website at www.graupner.de under
the downloads for the respective product.
Download this software package, such as the en-
trance to the section “Update the transmitter software”
on page 50 describes from the related internet page
and unzip it on your PC or laptop. For details, please
refer to the same internet page detailed instructions.
Note:
After registering your receiver at
https://www.graupner.de/de/service/
produktregistrierung.aspx
you will automatically receive notication of future
updates per email.
As you enter the section “Update the transmitter
software” on page 50, after having downloaded from
the Internet and unzipped on the PC or laptop the
software packet, among other things it is included the
PC program “Firmware_Upgrade_grStudio” .
You may even have already installed this program on
your PC or laptop.
With the menu item “Receiver settings” this PC
program “Firmware_Upgrade_grStudio” it is always
possible to save all the settings programmed in a
receiver to a file on the PC or laptop, so you also
can transfer back to the receiver these if necessary.
The otherwise possibly necessary reprogramming
of a receiver via the menu “Telemetry” is therefore
unnecessary.
For this program the default to mc-32 HoTT
transmitter set (No. 33032) is included USB interface
(No. 7168.6) and also the supplied interface cable
(No. 7168.S) are needed.
For details, please refer to the place on the internet at
the same place detailed instructions.
Secure receiver settings
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info