467111
38
Zoom out
Zoom in
Previous page
1/345
Next page
38 Transmitter description - Secret mode
1
3
5
7
9
11
13
15
0
0
0
0
0
0
0
0
–50
0
0
0
0
0
0
0
2
4
6
8
10
12
14
16
One after the other, put both sticks into each of their
four possible limit positions without exerting force at
the limit position. In each of these eight possible limit
positions, the – side dependent – indication for exactly
-100 % or +100 % should be displayed. For example,
if transmitter control 2 is at its right limit and the other
three stick functions are in their respective middle
positions then the transmitter's display should look
like the one shown below.
1
3
5
7
9
11
13
15
–100
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
4
6
8
10
12
14
16
Regardless of the number of self-neutralizing stick
functions available on your transmitter, if these checks
produce four 0 % results and eight 100 % results then
your transmitter's sticks are optimally calibrated. You
can terminate this process then, if appropriate, delete
the model memory just created.
Otherwise jump (as described at the outset of the
previous double page) to the "Stick calibration" line in
the »SECRET MODE« menu...
SECRET MODE
BOTTOM LCD CONTRAST
FIRMWARE UPDATE
0
STICK CALIBRATION
VOICE UPDATE 0
... then briefly touch the centre SET key of the right
touch pad.
STICK CALIBRATION
0%
The  selection keys of the right touch pad will now
allow you to cyclically select the four calibrated stick
planes, e. g. the left/right plane of the right stick.
STICK CALIBRATION
0%
Now position the right stick without exerting extra
force to its left limit corresponding with the on-screen
blinking arrow pointing to the left.
STICK CALIBRATION
+102%
… and briefly tap the centre SET key of the right touch
pad. This concludes this example calibration of the
right stick's left limit. The circle in the middle of the
stylized stick plane will now blink as confirmation of the
calibration.
STICK CALIBRATION
+100%
Now release the self-neutralizing stick so it can return
to its centre position and then tap again on the centre
SET key to calibrate the stick's centreed position. The
right triangle marker will begin to blink.
STICK CALIBRATION
0%
Repeat the calibration process for the right limit of the
right stick. The other stick planes are calibrated analo-
gously.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info