467111
7
Zoom out
Zoom in
Previous page
1/345
Next page
7
Safety notices
Using electronic speed controllers
Choosing the right electronic controller is largely a
matter of matching controller performance to the mo-
tor to be controlled.
In order to prevent an overload or damage to the
speed controller, its current rating should be at least
half of the maximum locked-rotor current draw of the
motor to which it is connected.
Particular attention is appropriate for so-called “tuning
motors”. Because of their low-turns coils these motors
can draw a multiple of their rated current in a locked-
rotor condition and this can lead to the destruction of
the speed controller.
Electric ignition systems
Combustion motor ignition systems also produce
interference that can negatively influence remote
control functionality.
Always supply power to an electric ignition system
from a separate, dedicated battery.
Use only interference-suppressed spark plugs, spark
caps and shielded ignition leads.
Mount the receiver sufficiently far away from ignition
system components.
Static charges
WARNING:
A remote control system will be destroyed
by the magnetic shock waves produced
by a lightning strike even if the storm is
miles away. Therefore, stop ying right away if a
storm is approaching. Static charging via the
antenna also represents a lethal hazard.
Attention
In order to fulfill FCC HF emission require-
ments for mobile transmitters, a distance
of at least 20 cm must be maintained
between this system’s antenna and other persons
when this system is operating. Operation of this
system at a lesser distance is therefore not recom-
mended.
To avoid disturbance caused by the electrical
characteristics and emissions of other transmit-
ters, keep at least a 20 cm distance from other
transmitters.
Operation of the remote control system requires a
correct program setting for the given country in the
transmitter unit. This is necessary for compliance
with diverse regulations like FCC, ETSI, CE etc.
Follow the respective instructions provided for this
with the transmitter and receiver.
Prior to every flight, perform a complete functional
test, range test and execute a complete simulated
flight in order to exclude the possibility of system
faults or problems with the model’s programming.
Never program the transmitter or receiver while
the model is being operated.
Care and maintenance
P
Never clean the housing, antenna, etc. with
cleaning agents, gasoline, water or similar
means. Use only a dry, soft cloth.
Components and accessories
WARNING:
As manufacturer of this equipment Graup-
ner GmbH & Co. KG recommends only com-
ponents and accessories which have been
tested and approved by Graupner for their suitability,
functionality and safety. If this recommendation is
followed, Graupner accepts responsibility for the
product.
Graupner cannot accept any responsibility for
the parts or accessories of other manufacturers
which have not been approved and Graupner
cannot evaluate every individual product made by
other companies to assess if they are safe to use.
Liability exclusion / damage compensation
This manual serves only as a source of information
and can be changed without prior notification. Graup-
ner accepts no responsibility or liability for errors or
inaccuracies which may be contained in this manual.
Graupner cannot monitor compliance with the as-
sembly instructions, the operating instructions or the
conditions and methods under which remote control
components are installed, operated, utilized or main-
tained. Therefore Graupner accepts no form of liability
for loss, damage or costs consequential to incorrect
usage or operation or which can be attributed to
same.
Unless otherwise prescribed by law, the obligation of
Graupner to provide damage compensation, regard-
less of legal grounds, is limited to the invoice value of
the quantity of Graupner goods contributing directly
to the damage-inducing event. This does not apply if
Graupner is found to be subject to unlimited liability
pursuant to binding legal stipulations with respect to
intent or gross negligence.
Furthermore we will only consider claims
if a log le is present; see page 26 un-
der “Data recording” so as page 159
under “Flight time”. For the same reason the
transmitter must always be updated to the latest
software status.
Keep in mind, however, that for technical reasons
during playback of MP3 les NO data recording is
possible.
It is essential that you register at https://www.graup-
ner.de/en/service/product_registration.aspx to ensure
that you are constantly informed of important soft-
ware updates. This is the only means by which we
can automatically keep you aware of new updates by
e-mail.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info