747991
27
Zoom out
Zoom in
Previous page
1/40
Next page
27 / 40
33028_mc28_T1V3_sh_en
Inserting the transmitter battery
Connect the battery plug in the transmitter socket. Make sure
that the polarity is correct. Pay attention to the respective "+"
and "-" symbols near the socket.
Red= „+“ Black/brown = „-“
Place the battery into its compartment and close the cover.
2. Through the USB port by charging with USB cable
The transmitter battery can be charged by the current supplied
by the USB port (5 V/max. 2 A).
Connect the transmitter to a USB port in your PC using the
included micro USB cable or a USB net charger.
Low voltage warning
#01
3:21h
S
0:00 0
0
0.0V
3.5V Mx
xT
Batt. must
be re-
charged !!
The transmitter battery voltage should be monitored in the display
during operation. In case the voltage drops under a preset threshold,
standard setting 3,6 V, an acoustic warning signal is emitted and in
the display appears in a window "battery needs charging".
Now at the latest, stop operation and recharge the transmitter bat-
tery!
Battery use timer in the display
The battery use timer is shown in the lower left part of the display.
The battery use time is added at every use. After every charge the
timer is reset to "00:00". This happens only if the battery voltage
increases at least of 0,3V or if the battery is full.
Switch off the transmitter
Power off
Cancel
If you push on the POWER button, by switched on transmitter, for
more than 2 sec. a safety query appears (see image). Select the
desired option with one of the pouch pads (up or down) and push
the SET button.
This safety query avoids an accidental switch off of the transmitter
while in use.
Lithium battery
On the transmitter board there is a fixture for a replaceable lithium
battery of type CR 2032. This battery maintains the date and time
settings during a transmitter power supply outage.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC-28

Graupner MC-28 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info