747991
20
Zoom out
Zoom in
Previous page
1/40
Next page
20 / 40 33028_mc28_T1V3_sh_en
Commissioning
Hand pads
Installing the hand pads
The hand pads have to be installed on the sides of the transmitter.
Hold the hand pad exactly upon the six holes and fix it with the 6 fix-
ing screws. Use the same procedure for the other hand pad.
Attention
Screw the fixing screws only with the hand pads on the transmitter
case. The place inside the transmitter case will otherwise not be
enough and you could damage the boards.
Removing the hand pads
The hand pads are removed by unscrewing the fixing screws.
After removing the screws glue the included rubber pins on the
holes. So you will protect the transmitter interior.
Attention
Do not screw the fixing screws in the holes after removing the hand
pads! The place inside the transmitter case will not be enough and
you could damage the boards.
Brackets for transmitter belt
Installing the metal brackets
Insert the included metal bracket in the bracket holder on the side
of the transmitter.
Push the bracket against the spring (approx. 1 cm in the transmitter
direction).
Contemporaneously rotate the bracket to the outside to fix it.
Proceed similarly with the second bracket.
Removing the metal brackets
Unlock a bracket, by gently pushing it inwards and then fold in the
direction of the transmitter center.
Once the retaining pin is free again, you can pull the bracket away
from its place.
Proceed similarly with the second bracket.
Anchorage for the transmitter belt
On the upper side of the transmitter there is an eyelet which can be
used to hook a neck-strap.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC-28

Graupner MC-28 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info