747993
75
Zoom out
Zoom in
Previous page
1/80
Next page
75 / 80
33028_mc_28_Teil2_jh
Ring limit
This function is used to control up to three of the so-called
Voith-Schneider drives of ship models. The function only appears in
the multi-function menu when the model type "Boat" has been
selected.
In the "Input" column, select the two channels to be used for con-
trolling the drive unit. You can also use channels 5 - 16. A control
must then be assigned on the selected channel.
In the "Output" column you can define the output channels, which
control the servos of the drive unit.
Activating the ring limiter in the "SET" column.
Change to the setting side of the ring limiter in the "=>" column.
In the setting page of the respective "ring limiter" the maximum
travel is set between 25 and 125% in the first line. The measure of
the limitation of the total deflection is set in the second line between:
0 % Circular limiter ()
100 % without limiter () - The limit is the mechanical limit stop of
the respective control stick.
In the two upper "max-X" and "max-Y" value fields set the required
(servo travel) limit in the range of 25 - 125%, separately for both con-
trol functions "left / right" and "forward / backward" . The adjust-
ment is enacted so that the servos in the model are no longer run-
ning.
In the line underneath, labeled "<=>-X" and "<=>-Y" in the
lower-left side, you can influence the shape of the limiter between
"circular" and "square" with setting values between 0 and maximum
125 %. The setting value can never be greater than the value in the
field above.
4
4
4
Ring limiter
Input SET
3
9
11
OFF
OFF
OFF
Output
X
3
3
3
Y Y
4
10
12
X
0%
R.lim.1
max-X
0%
CH 4
100% 100%
CH 3
0%
R. lim.1
-X
0%
CH 4
100% 100%
CH 3
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info