747993

Graupner MC-28 4D Manual

67
Zoom out
Zoom in
Previous page
1/80
Next page
67 / 80
33028_mc_28_Teil2_jh
Switch-on melody
In this line, you can turn on and off the switch-on and the switch-off
sounds.
Battery alarm threshold
In this line you can preset the warning threshold of the display in
0,01V steps between 3.50 and 4.50 V (depends on the type of bat-
tery used). Make sure that the set value is not too low to give you
sufficient time to land your model after a battery warning.
Switch-on warning
Here select the period until the switch-on warning becomes active
("unlimited" = off). If you do not operate an operating element within
the set time, an optical and acoustic warning is issued. If no operat-
ing element is run, the transmitter switches off after approximately
three minutes.
Touch sensitivity
In this line you can set the touch sensitivity of the touch buttons in
the range from 1 to 10. The lower the number, the faster the reac-
tion.
DATA sel.
A Smart Box, an external RF module or the external Bluetooth mod-
ule of the mz transmitters (No. 8351) can be operated on the data
socket. Following settings are possible:
"Telemetry"
Data protocol for an external RF module and for data output on the
Smart Box in the "EXTERNAL MONITOR" menu.
"BLUETOOTH"
Data log for the external Bluetooth module (No. 8351) and for trans-
mitting telemetry data and voice output on smartphones and tablets
with "Graupner HoTT Viewer App for Android".
Ph. Name 1 … 10
Here you can input your own phase names. These names are dis-
played when you activate the phase.
You can assign up to seven characters per phase name.
BT headset and following lines
Here you can find and pair Bluetooth devices. You can also select the
transfer method and deselect all connections to BT devices. When a
connection is established, the next line shows the number of paired
devices. In the next line you can start and stop an existing connec-
tion. In the last line you can adjust the volume of the Bluetooth
device.
Basic settings
SEL
BT Headset A2DP
1/3BTH002
ID PAIR ON
BT Volume 8
OK
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info