747993
57
Zoom out
Zoom in
Previous page
1/80
Next page
57 / 80
33028_mc_28_Teil2_jh
Dual mixer
In this menu, you can link two control functions with four freely pro-
grammable dual mixers.
Example (V-tail mixer):
In the case of a dual mixer, the control signals are output from the
two controls to both outputs of the mixers.
In the right column, you can set the differentiation value between
the two outputs.
Fail Safe
In this menu set the positions of all the servos. The position of the
servos are approached in the event of a fault in the radio connection
and from when the receiver is switched on until the radio connection
to the transmitter is reestablish.
You have the following possibilities (switch the receiver on:
"Hold" - In the event of a missing radio connection, the servo is held
at the last position before the radio connection failed. When the
radio connection is restored, the servo reacts again normally.
"Pos." - In the event of a missing radio connection, the servo is moved
to a certain position after the set delay time.
Position setting:
Set the "Pos." Function of the desired channel
Delay setting
Move the servo in the desired position
Select STO, tap the SET button
The position is confirmed by "Position stored"
Ty p Diff.
zu
Dual mixer
Mixer1
Mixer2
?? ??
Mixer3
Mixer4
?? ??
?? ??
?? ??
0%
0%
0%
0%
33
4
Servo 4,8 V
C 577
Best.-Nr. 4101
Servo 4,8 V
C 577
Best.-Nr. 4101
4
V-Tail
mixer
Control functions
inputs
Control channels
(receiver
outputs)
Elevator control stick
Rudder control stick
Rudder / Elevator right
Rudder / Elevator left
Rudder
Elevator
Elevator
Rudder
Seite
Elevator
Fail-safe adjust
Pos.
hold
1 2 3 456
DELAY: 0.25s STO
Fail-safe adjust
Pos.
hold
13 14 15 16
DELAY: 0.25s STO
Position stored
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info