747993

Graupner MC-28 4D Manual

17
Zoom out
Zoom in
Previous page
1/80
Next page
17 / 80
33028_mc_28_Teil2_jh
Copy phase
Select the "Copy phase" point and confirm with the SET button.
You can always interrupt the process with the ESC button.
• Select the phase to copy and confirm the selection with the SET
button.
• Select the target phase and confirm the selection with the SET
button.
A safety question will appear. If you select YES and press the SET but-
ton, the copy process will be performed. If you select NO, the copy
process will be interrupted.
Permanently save changes / undo changes
The last state of the programming of the model is saved in the model
memory if you perform a model change or if you switch the trans-
mitter off. The change will be manually edited during the use with
the “Permanently save changes / undo changes” function.
You can immediately and permanently save the edited programming
in the model memory with the “Permanently save changes / undo
changes” menu point.
You can undo programming changes implemented during use with
the “Permanently save changes / undo changes” menu point. This
menu point can restore the last performed programming. You can
choose when the undo action should start, either the last switch-off
or the last manual saving.
A safety question will appear. If you select YES and press the SET but-
ton, the related process will be performed. If you select NO the pro-
cess will be interrupted.
7
Copy to phase:
3
5=>
=>
2
4
6
1
Copy phase
Erase model
Copy model–>model
=>
=>
=>
Export to SD
Import from SD =>
=>
=>
=>
7
Copy from phase:
3
5=>
=>
2
4
6
1
Copy phase
=>
=>
=>
Export to SD
Import from SD
=>
=>
=>
=>
Store changes
undo changes
Copy phase
=>
=>
=>
Export to SD
Import from SD
=>
=>
=>
=>
Store changes
undo changes
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info