747929

Graupner GR-24L HoTT - S1022 Manual

6
Zoom out
Zoom in
Previous page
1/15
Next page
7
3. Fail-safe function
In its default state, the receiver is set to “Hold” mode. If you lose connection, all
channels hold last given command and the status LED on the receiver turn solid red.
The transmitter also repeats a single warning beep every second. You can use the fail
safe option by programming the throttle channel to respond to a fail-safe situation. : the
throttle channel of an engine-powered model should be set to idle, the throttle channel
of an electric-powered model to “stop”, and the throttle channel of a model helicopter to
“Hold”. When a signal is lost the throttle channel, all channels are driven to the failsafe
position so that it could prevent the model crashing and the personal injury or property
damage.
During normal operations (i. e. when controlling a model) never enter
the range check mode !
CAUTION
The two functions “Binding” and “Range check” described above can be
used by the programming button or the SMART-BOX without any inuence
on the setting value saved in the transmitter and the receiver. However, if
the fail safe option is used by the programming button, all the setting value
which is seen on the fail safe screen in SMART BOX, including the setting
value that could be installed by the programming button, might be reset. For
this reason, we recommend the programming by SMART BOX.
4. Range warning
Since the transmitter’s output is much higher than that of the receiver, the user tends
to be hard to notice the seriousness of the situation and try to keep full control of the
model. So when the receiver signal in the down-link channel becomes too weak, the
transmitter repeats a single warning beep every second. You should y back the model
towards the safe place until the warning signal ceases. If the beep warning does not
cease when you y back, it is that the transmitter or receiver low voltage warning or tem
-
perature warning is activated, you must land the model and cease operations without
delay in this situation.
IMPORTANT
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24L HoTT - S1022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24L HoTT - S1022 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info