747933
48
Zoom out
Zoom in
Previous page
1/51
Next page
48 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
Firmware update
Firmware updates are carried out via a receiver-specific connecon
using a PC with Windows 7 ... 10. You will also need a USB interface,
No. 7168.6, and adapter lead, No. 7168.6A or 7168.S, which are
available separately.
The programs and files required can be found in the Download area
for the corresponding products at www.graupner.de.
!
CAUTION
By updang to this version, the receiver is automacally reset to
the factory sengs. Therefore, note in your own interest before
updang all seng values and always carry out a setup of the
receiver aer the update.
Connect the adapter lead to the USB interface. The connectors are
reverse polarity protected: note the small chamfers on the sides. Do
not use force, the plug should click into place easily.
For the two Falcon receivers S1034 and S1035, plug the other end
of the adapter cable into the port marked "C5", the two GR-18 HoTT
receivers S1019.AIR and 33579 to the "T/9" and the GR- 24 HoTT No.
33583 into the socket marked "- + T", see also adjacent table.
The polarity of the plug-in system cannot be reversed. Do not apply
force. The plug should be fully inserted.
The update is made via the program
secon "Slowyer / Gyro
Receiver Update" of the program "Firmware_Update_gr_Studio"
found in the "Link" secon. Please follow the notes of the soware.
The further procedure is also described in detail in the manual con-
tained in the data package. You can also download these from the
download page of the product at www.graupner.de.
Note
The following informaon is based on version 4.9.3.x of "Firmware_
Update_grStudio". In older versions, the files listed below can be
found in the directory into which they were copied during unpack-
ing.
The associated applicaon program can also be started directly by
double-clicking the "micro_gyro_swloader.exe" file found in the "\\
Program Files (x86) \ Graupner \ gr_Studio" installaon directory of
the "HoTT_Soware VX" package.
In the program window "micro_gyro_swloader.exe", the "correct"
COM port of the USB interface must first be set.
Possibly, the correct port number can be found aer opening the
"Firmware_Update_grStudio" and clicking on the opon "Select
port" in the line "Silicon Labs CP210x USB to UART Bridge", for exam-
ple "COM03".
Updates
S1019.AIR T/9
S1034 C5
S1035 C5
33579 T/9
33583 T
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24 PRO in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-24 PRO

Graupner GR-24 PRO User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info