747933
27
Zoom out
Zoom in
Previous page
1/51
Next page
27 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
In the transmier, the seng of the direcon of rotaon for
both aileron servos must always be idencal. So either both nor-
mal or both reverse! If this is not possible, the relevant servo
must be installed in the model turned accordingly!
Are used programmable servos, for example Graupner DES, HVS
or HBS servos, the servo reverse seng can be made directly in
the servo according to the corresponding instrucons.
Observe the instrucons for receiver installaon further in this
manual!
If required, the axes can be manually reset to "+0" (= gyro inac-
ve). Do not manually set any other value unless you know
exactly what you are doing.
Do setup
Aer selecng the line "do setup" and changing the value field to
"yes", assign the axes as follows:
Do setup step by step
1. Select line press or tap the ENT key.
"NO" is displayed inverted.
2. Change the value field to "YES".
3.
Push or tap on the ENT key.
4. At the transmier, move the aileron control sck in the right hand
direcon at least 25% of the control way.
The display shows the "Aileron" inverted.
5. Tilt the model more than 45 degrees to the right.
As soon as the detected axis with the sign axis number is dis-
played in "normal" representaon, the axis assignaon is com-
pleted.
The number results from the addressed gyro axis and the sign
from installaon posion of the receiver and servo direcon
of rotaon.
6. At the transmier, move the elevator control sck forward at
least 25% of the control way.
The display shows the "Elevator" inverted.
7. Tilt the model more than 45 degrees to the front.
As soon as the detected axis with the sign axis number is dis-
played in "normal" representaon, the axis assignaon is com-
pleted.
8. At the transmier, move the rudder control sck in the right hand
direcon at least 25% of the control way.
The display shows the "Rudder" inverted.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24 PRO in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-24 PRO

Graupner GR-24 PRO User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info