747933
24
Zoom out
Zoom in
Previous page
1/51
Next page
24 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
Notes
The trim of the transmier, in parcular the trim of the ailerons,
can only be used without restricons in mode "0", if necessary
with cauon in mode "1" and must be le in neutral posion in
modes "2" and "3".
If the model is too agile in mode 3, it is then recommended to
set in the transmier DUAL RATE and/or EXPO for this mode.
Thus the model will react in a more docile way. In the Rate mode
the model tries to reach the controlled rate. Also in mode 2
EXPO can be useful.
Aileron/elevator/rudder
Gyro setting
MODE RU 0
Aile: 5
Elev: 5
MODE AI/EL 0
Rudd: 5
Factor: OFF
The regulaon can be xed separately for "Aileron", "Elevator" and
"Rudder" in the range of 0 ... 10; Switched off; or be set accordingly
via one of the available control channels C5 ... C16 assigned to this
funcon.
Adjustment range: 10 … 0, OFF, (0 ... 10)C5 … C16
Notes
The seng values should not exceed the range of 4 ... 5 in nor-
mal flight, 2 ... 3 in speed flight and 3 ... 6 during landing. Only
by Torque the maximum value can be at 10.
A seng value of "0" switches off the relevant control.
FACTOR
The seng of a factor aects the parameters of "aileron", "elevator"
and "rudder" equally.
Adjustment range: OFF, (0 ... 200)C5 … C16
If a proporonal control is assigned to the selected control channel
in the transmier, this can be used to set the desired factor between
± 200% in 1% increments.
Notes
The OFF value means a gyro acon of 100%!
If no control is assigned to the selected control channel, a factor
of "100%" results due to the then normally present neutral posi-
on of the control channel.
The standard factor should cause the gyros to correct the mod-
el’s atude quickly when it is upset by an outside influence.
Without causing oscillaon, but in pracce the opmum values
for a parcular model can only be found by flight-tesng. If the
model shows lile or no automac stabilizaon with the default
sengs, the value should be raised; on the other hand. If the
model oscillates (wave-like movements in flight), the value
should be reduced.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24 PRO in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-24 PRO

Graupner GR-24 PRO User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info