11.2 Fast reading
Keep key R pressed.
The first memory location in block 00 is displayed.
Here, always the first measuring period:
detent time (to) and integration time duration (tm)
Then, the first date or the first switching time in the relevant block is displayed with N.
The information in between is normally read with R.
The blocks are interrogated in ascending order.
11.3 Clearing
With CL, only the information which is respectively shown in the display is cleared.
If only the date assignments are cleared within a particular block – individual days or date range – a E appears instead of the priority
number during reading.
! Exception: In the case of mask-out times ! See Point 12.
11.4 The entire memory contents – including the current date – is cleared with Reset.
! Exception: Standard definition for measurement periods ! See Point 12.
12. Entering the MDI integration times
Two independently adjustable integration times can optionally be programmed on Channel 2 and/or Channel 1.
Standard definition on Channel 2: detent time (to) = 09 seconds
integration time duration (tm) = 15 minutes
Press the key once:
The detent time is changed with ascending counting with the key (01, 02 … 59, 01, 02 … ).
The integration time duration is changed counting upwards with the key m+ in defined steps (05, 10, 15, 20, 30, 60, 05 … ).
Note:
If required, the integration time can also be programmed on Channel 1 or a second integration time can be programmed on the free channel.
The channel change/selection is determined with the key I/0 of the corresponding channel.
Store the selected values with S.
See Point 11.0 for the values Read – Change – Clear.
A mask-out time can be programmed for each for the MDIs
The switching state during the mask-out time can optionally be preset to I = ON or 0 = OFF.
Examples for Channel 2:
MDI
Mask-out time
ON = I
The integration time must first be entered in the MDI and Mask-out time combination. Store it with N.
(to) – detent/pulse time
in seconds (01… 59)
(tm) – integration time duration
in minutes (05… 60)
Hours, minutes (start)
Hours, minutes (end)
22:00
start
6:00
end
