– with key "h+"
enter the current date, e.g. 09
– with key "m+"
enter the current month, e.g. 02
– enter the current year with
the "m+" key
– select the required variant with
the key "m+"
activate AU
(Automatic)
with the key " "
The time switch changes
to the current operating
state
– enter the summer time starting date
with "h+" and "m+"
(e.g. 28:04)
Press the key " "
– enter the end of summer time with
"h+" and "m+" (e.g. 26:09)
The time switch changes to the current
operating state
Press the key "±1h" once
(only if mode cHA or HA is required)
Entering the current date
Press the keys "±1h" and "➜Day" once simultaneously.
Display
flashing
Press the key "±1h" once
Press the key "±1h" once
Press the key "±1h" once
Cursor of the
current day
of the week
flashes
Ho = Holiday
Image I
If the holiday program is to start on a different day to the current
one – max. 6 Tdays ahead – use the "Day" key to select the day
on which the holiday program is to commence.
If the holiday program is to be executed for up to max. 99 days,
continue with steps
+
.
If the holiday program is to be executed for an unlimited period,
leave out step
and continue with step
.
Enter the required number of holiday days with the "Sel." key
(1 to max. 99).
Press the " " key to save the entries.
If the current day of the week was entered as the holiday program
start, the following appears:
d = day
number of
entered
holiday days
Image II
Image II remains until the holiday days have passed,
for example d:10, d:09, d:08 .......... etc.
Pressing the " " key again and holding it down now allows the day
of the week, the time and the current switching state – " " = ON or
" " = OFF – to be checked.
If a day of the week other than the current day was entered as the
holiday program start, the current time is displayed after the " " key
is pressed. The holiday program is then started at midnight at the start
of the selected day of the week and its duration is displayed (Figure II).
After the programmed holiday days have expired, the current time
appears in the display.
Aborting the holiday program prematurely
If the holiday program has already started:
● Press the " " key once
If the holiday program has not yet started:
● Press the " " key twice
Entering switching times as described under 1.3
The " " key must be pressed for eauch switching time.
Next save the holiday switching times with the "Prog" or " " key.
Entering the start and duration of the holiday program
After entering the switching times for the holiday program
Press the " " key once. The following image appears:
2.7 Holiday program
Note:
The holiday program has priority over the standard week program.
The holiday program can only be entered if all seven days of the week
(1234567) are selected.
3. Technical data
Connection see unit imprint
Switching capacity see unit imprint
Ambient temperature –10 °C to +55 °C
Running reserve 150 h at +20°C
Memory locations 42
Shortest switching time 1 min.
Programmable every minute
Protection IP 20
Display
Display
Display
Display
Display
