Manual Grasslin Talis II RC IR10 (page 4 of 20) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

738281

Zoom out

Zoom in

1/20

General

• talis II RC IR10 is a service remote control

for commissioning and ﬂexible adjustment

of individual parameters. It is suitable for the

following presence detectors:

− talis II P 360-24-1i

− talis II PHB-20-1i

− talis II PC 40-5-1i

• Interventions in and modiﬁcations to the device

shall result in loss of warranty and guarantee.

• Read and observe this manual in order to

ensure trouble-free functioning of the device

and safe work.

For more information:

http://qrc.graesslin.de/801015327

Commissioning

Before using the product, remove the protective foil

between the battery and the contact (Fig. 2).

Operation

Lock/unlock the IR receiver

Select channel CH1 or CH2

TIME:

Set time for delay time of 30s to 60min

Brief pulse

LUX:

Set lux from 10lux to 2000lux

Daylight; the sensor switches at any

brightness

Teach-in mode for switching at any

ambientlight

Automatic mode

Semi-automatic mode

Test mode

10 hours ON mode

10 hours OFF mode

Set the sensitivity

Menu sequence

1. Unlock the IR receiver.

The LED on the IR receiver ﬂashes twice.

2. Select the channel.

3. Make the desired settings.

4. Lock the IR receiver.

The LED on the IR receiver lights up for two

seconds.

If no button is pressed for 30seconds, the menu

sequence is terminated and the IR receiver is

locked again.

Technical data

Battery 3VDC lithium CR2032

Transmission range < 15m (Fig. 3)

Transmission angle 30° (Fig. 3)

Ambient temperature 0°C to +40°C

Operating manual

talis II RC IR10 – service remote control

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grasslin Talis II RC IR10 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grasslin Talis II RC IR10 Manual

Product: