505361
27
Zoom out
Zoom in
Previous page
1/36
Next page
GXV3601 IP Camera
Firmware 1.0.4.6 Page 27 of 36
Grandstream Networks, Inc. 09/2010
per second in a digitally modulated signal or a line code.
Connect a PTZ device to the GXV3601
1. Connect the PTZ device to GXV3601 by following the connection diagram shown
below
2. Click Advanced Settings > PTZ; in PTZ page, configure the PTZ Protocol and
Baudrate according to your connected PTZ device.
3. Click Save and reboot the device to apply all changes.
4. Use those PTZ buttons on the homepage to tilt, pan the GXV3601 and also adjust the
speed.
NOTE: GXV3601 itself does not support PTZ. The users can connect a PTZ device to the
GXV3601 via RS485 pins to pan, tilt and speed.
The FOCUS function may not work as many dome cameras support auto focus.
Press and hold the corresponding control button to adjust the pan, tilt, and speed.
GXV3601 Alarm Event
The GXV3601 supports alarm inputs, for example, infrared detector, smoke detector and so
on.
Follow the steps to make Alarm Input work:
1. Connect alarm input equipment to the GXV3601.
2. Set up the alarm event time schedule.
3. Configure the alarm actions which you would like the GXV3601 to take when alarm is
triggered.
How Alarm Input and Alarm Output Work
Alarm-in is the alarm input port; users are able to connect sensors such as infrared sensor,
smoke sensor or light sensor to it. The detectable signal voltage range for alarm-in is from
1.8V to 15 V NOTE: Please do not connect a device that has a signal voltage that is higher
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grandstream GXV3601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grandstream GXV3601 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info