505355
58
Zoom out
Zoom in
Previous page
1/139
Next page
FIRMWARE VERSION 1.0.3.74 GXV3175 USER MANUAL Page 58 of 139
public IP addresses and port in all the SIP and SDP messages.
If the “NAT Traversal” is configured to be “Keep-alive”, the phone will send
an empty SDP packet (without payload data) to the SIP server once in 20
seconds to keep the NAT port open.
If VPN is used, users should select VPN for NAT Traversal.
Users could also set Auto or UPnP according to the network
configuration.
If an outbound proxy server is used, please configure this to be “NAT No”.
Proxy Require
Notifies the SIP server that the unit is behind a NAT/Firewall.
Account/SIP Settings
SIP Registration
Selects whether or not the GXV3175 will send a SIP Register message to
the proxy; The default setting is Yes.
Unregister On Reboot
If set to Yes, the SIP user registration messages will be cleared on reboot.
The default setting is Yes.
Register Expiration (m)
This defines the expiration time of the registration in minutes. The default
value is 50 minutes; the maximum value is 65535 minutes (approximately
45 days) and the minimum value is 5 minutes.
Wait Time Retry
Registration (s)
The wait time for registration retry if registration fails. The default is set to 20
Seconds.
Local SIP Port
The local SIP port for sending and receiving data. The default settings for
Account 1/2/3 are 5060/5062/5064.
SUBSCRIBE for MWI
Default is set to No. When selected, a SUBSCRIBE for Message Waiting
Indication will be sent out periodically.
Session Expiration (s)
Session Expiration is the time (in seconds) at which the session is
considered timed out if no successful session refresh transaction occurs
beforehand. The default value is 180 seconds.
MIN-SE (s)
The minimum session expiration (in seconds). The default value is 90
seconds.
UAC Specify Refresher
As a Caller, select UAC to use the phone as the refresher, or select UAS to
use the Callee or proxy server as the refresher.
UAS Specify Refresher
As a Callee, select UAC to use the caller or proxy server as the refresher, or
select UAS to use the phone as the refresher.
Force INVITE
The Session Timer can be refreshed using the INVITE or UPDATE
methods. Select Yes” to use the INVITE method to refresh the session
timer
Caller Request Timer
The default setting is Yes. If Yes is selected, the phone will use the session
timer when it makes outbound calls if remote party supports session timer.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grandstream GXV3175 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grandstream GXV3175 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info