67329
13
Zoom out
Zoom in
Previous page
1/54
Next page
Grandstream Networks, Inc. GXV-3000 User Manual Page 11 of 54
Firmware 1.1.3.50 Updated: 04/2009
MULTIPLE SIP ACCOUNTS AND LINES
The GXV-3000 can support up to 3 independent SIP accounts. Each account is capable of independent
SIP server, user and NAT settings. Each of the 3 line buttons (LINE1-LINE3) is “virtually” mapped to an
individual SIP account. In off-hook state, select an idle line and the name of the account (as configured in
the web interface) is displayed on the LCD and a dial tone is heard. Or, press the selected line continu-
ously until the related SIP profile showed up on the LCD.
For example: Configure the three SIP accounts as “FreeWorldDialup”, “BroadSoft” and “Asterisk PBX”
respectively and ensure each is active and registered. When LINE1 is pressed, you will hear a dial tone
and see “FreeWorldDialup” on the LCD display; when LINE2 is pressed, you will hear a dial tone and see
“BroadSoft” on the LCD display; when LINE3 is pressed, you will hear a dial tone and see “Asterisk PBX”
on the LCD display. Or press LINE1 twice you will hear dial tone and see “BroadSoft” also.
To make a call, select the line you wish to use. The LED will light up solid red. If you continue to press
one LINE, it will circulate among the registered accounts.
For example: when LINE1 is pressed, the LCD displays “FreeWorldDialup”; If LINE1 is pressed twice, the
LCD displays “BroadSoft” and the subsequent call will be made through SIP account 2 - BroadSoft.
Incoming calls to a specific account will attempt to use its corresponding LINE if it is not in use. When
the “virtually” mapped line is in use, the GXV-3000 will flash the next available LINE (from left to right) in
red. A line is ACTIVE when it is in use and the corresponding LED is solid red.
Handset, Speakerphone and Headset Mode
Handset can be toggled between Speaker/Headset. To switch between Handset and Speaker/Headset,
press the Hook Flash in the handset cradle or press the SPEAKER button.
Completing Calls
There are four ways to complete a call:
1. D
IAL: To make a phone call
Take Handset/SPEAKER/Headset off-hook
Or press an available LINE key (activates speakerphone).
The line will have a dial tone and the primary line (LINE1) LED is red.
If you wish, select another LINE key (alternative SIP account).
Enter the phone number.
press the SEND key.
2. R
EDIAL: To redial the last dialed phone number.
When redialing the phone will use the same SIP account as was used for the last call. Thus, when
the third SIP account was made for the last call/call attempt, the phone will use the third account to
redial.
Take Handset/SPEAKER/Headset off-hook or
press an available LINE key (activates speakerphone), the corresponding LED will be red.
Press the SEND button
3. U
SE THE MENU: Press the OK button to bring up the Main Menu. Select Phone Book and select
phone number. Press OK to select and press OK again to dial. The call will dial out in speaker-
mode
with related SIP profile.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grandstream GXV-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grandstream GXV-3000 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info