505335
95
Zoom out
Zoom in
Previous page
1/129
Next page
GXP2200 USER MANUAL Page 94 of 129
CHANGING BLUETOOTH DEVICE NAME
The GXP2200 uses "GXP2200" as Bluetooth device name by default. The device name will be visible to
other devices when connecting them. Follow the steps below to change the name:
1. Go to GXP2200's Settings;
2. Select Networks->Bluetooth settings;
3. Check Bluetooth to turn it on;
4. Tap on Device name and enter a name. Once done, tap on OK.
PAIRING GXP2200 WITH A BLUETOOTH DEVICE
Before connecting GXP2200 with other Bluetooth device, users must pair them first. They will stay paired
afterwards unless they are unpaired.
1. Go to GXP2200's Settings;
2. Select Networks->Bluetooth settings;
3. Check Bluetooth to turn it on;
4. The GXP2200 scans and displays the IDs of all available Bluetooth devices in range. If the device you
would like to pair with does not show up in the list, ensure that the other device is turned on and set to
be discoverable;
5. If the GXP2200 stops scanning before the other device is ready, touch Scan for devices;
6. The discovered device will show in the scan result list with device ID. If it's unpaired, it will show "Pair
with this device" under the device ID. Make sure the Bluetooth device is active in pairing mode. Then
tap on the device ID on GXP2200 to pair them. Confirm the passkey in the prompted message (if any).
Or If passcode is required, please refer to the device's documentation or other procedures to obtain
the passcode.
CONNECTING TO A BLUETOOTH DEVICE
After successfully paired, the GXP2200 will show "Paired but not connected" under the Bluetooth device
ID in the scan list. Tap on it to connect. For example, after successfully connecting a Bluetooth headset,
the GXP2200 will show "Connected to phone and media audio".
Once it's connected, users could also press and hold on to the Bluetooth device ID, then options
Disconnect, Disconnect & unpair, and Options will show. Tap on Options, users could select different
profiles for the connected devices (e.g., for Bluetooth headset, users could check or uncheck connect to
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grandstream GXP2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grandstream GXP2200 in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info