470669
36
Zoom out
Zoom in
Previous page
1/49
Next page
Grandstream Networks, Inc. GXP21xx User Manual Page 35 of 48
Firmware version: 1.0.1.110 Last Updated: 01/2012
Allow DHCP Option 42
to override NTP server
Default is “Yes”. This allows device gets provisioned for DHCP Option 42 from the
local server automatically.
SSL Certificate
The user specified SSL certificate used for SIP over TLS.
SSL Private Key
The user specified SSL private key used for SIP over TLS.
SSL Private Key
Password
User specified password to protect the private key above.
Distinctive Ring Tone
Select a Distinctive Ring Tone 1 through 3 for the caller ID. The Caller ID can be
configured as a particular caller ID or Alert-Info text.
When a particular call ID is configured in the Caller ID, the selected ring tone will be
used when the incoming call is from the Caller ID. System Ring Tone will be used for
all other calls.
If server supports Alert-Info, the Alert-Info text can be mapped to the 3 customized
ring tones. For example, if you configure the custom ring tone 1 user ID to “priority”,
that ring tone will be used if we receive INVITE with Alert-Info header in the following
format:
Alert-Info:;info=priority
System Ring Tone
System ring tone. Default is North American standard.
Users could adjust system ring tone frequencies and cadences based on local
telecom standard.
Call Progress Tones
Using these settings, users can configure ring or tone frequencies based on
parameters from local telecom. By default, they are set to North American standard.
Frequencies should be configured with known values to avoid uncomfortable high
pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
- Frequencies are in Hz
- Cadence on and off are in 10ms
- ON is the period of ringing (“On time” in “ms”) while OFF is the period of silence
- In order to set a continuous ring, OFF should be zero. Otherwise it will ring ON ms
and a pause of OFF ms and then repeat the pattern
- Up to three cadences are supported
Intercom User ID
Configure intercom user ID when intercom is used. This is for Account 1.
Disable Call Waiting
Default is “No”. If set to “Yes”, the call waiting feature will be disabled.
Disable Call
Waiting Tone
Default is “No”. If set to “Yes”, the call waiting tone will be disabled.
Disable Direct IP Calls
Default is “No”. If set to “Yes”, direct IP calls will be disabled.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grandstream GXP21xx series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grandstream GXP21xx series in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info