470665
36
Zoom out
Zoom in
Previous page
1/44
Next page
Grandstream Networks, Inc. GXP User Manual Page 36 of 44
Firmware 1.2.5.3 Last Updated: 03/2011
Use Quick IP Call Mode
Dial an IP address under the same LAN/VPN segment by entering the last octet
in the IP address.
In the Advanced Settings page there is an option Use Quick IP-call mode
.
Default setting is No. When set to YES, and #XXX is dialed, where X is 0-
9 and
XXX <=255, phone will make direct IP call to aaa.bbb.ccc.XXX where
aaa.bbb.ccc comes from the local IP address REGARDLESS of subnet mask.
#XX or #X are also valid so leading 0 is not required (but OK). See
Quick IP
Call Mode
for details.
Disable Conference
Default is No. If set to Yes, conference will be disabled.
Lock keypad update
If set to “Yes”, the configuration changes via keypad are disabled.
Enable MPK Sending
DTMF
Default is No. If set to “Yes”, Muti-Purpose keys can be sent as DTMF.
For GXP2020/2010/2000.
Disable DND
Default is No. If set to “Yes”, the “DND” button on keypad will be disabled.
For
GXP2000, MUTE/DEL button functions as DND button when pressed while
phone is idle.
Disable Transfer
Default is No. If set to Yes, transfer will be disabled.
Disable Multicast Filter
Default is No. If set to Yes, the phone will not filter out (discard) multicast
packets.
Semi-Attended Transfer
Mode
Default is RFC5589 mode, which allows the REFER message to be sent after
INVITE is answered so that the
TRANSFER is not finished until it receives
responses
(e.g. 4xx, 2xx) from the SIP server.
Disable Headset Button
Default is No. If set to Yes, Headset button will be disabled and pressing it w
ill
have no effect.
Enable Constraint Mode
Default is No. If set to Yes, the phone will limit the end-user’s access to the
configuration of the phone.
Display CID instead of
Name
If set to “Yes”, CID will be displayed in the screen instead of Name. Default is
”No”. For GXP280/285 only.
Headset Port Type
Select either 2.5mm or RJ22 headset ports to be adjusted.
Headset TX gain (dB)
Increases the selected headsets (2.5mm or RJ22) TX gain by + or 6dB.
Default is 0dB
Headset RX gain (dB)
Increases the selected headsets (2.5mm or RJ22) RX gain by + or 6dB.
Default is 0dB
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grandstream GXP-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grandstream GXP-2000 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grandstream GXP-2000

Grandstream GXP-2000 User Manual - English - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info