470664
33
Zoom out
Zoom in
Previous page
1/44
Next page
Grandstream Networks, Inc. GXP User Manual Page 33 of 44
Firmware 1.2.5.3 Last Updated: 03/2011
Keep-alive interval
This parameter specifies how often the GXP
sends a blank UDP packet to the
SIP server in order to keep the “hole” on the NAT open. Default is 20 seconds.
Use NAT IP
NAT IP address used in SIP/SDP message. Default is blank.
STUN Server
IP address or Domain name of the STUN server. STUN resolution result will
be
displayed in the STATUS page of the Web UI.
Firmware Upgrade and
Provisioning
Default method is HTTP. Firmware upgrade may take up to 10 minutes
depending on network environment. Do not interrupt the firmware upgrading
process.
Via TFTP Server
This is the IP address of the configured TFTP server. If selected and it is non-
zero or not blank, the GXP will attempt to retrieve a new configuration fi
le or new
code image from the specified TFTP server at boot time. It will make up to 3
attempts before timeout and then it will start the boot process using the existing
code image in the Flash memory. If a TFTP server is configured and a new code
image is
retrieved, the new downloaded image will be verified and then saved
into the Flash memory.
Note:
Grandstream strongly recommends that the user upgrade firmware locally
in a LAN environment if using TFTP to upgrade. Please do NOT interrupt the
TFTP upgrade process (es
pecially the power supply) as this will damage the
device.
Via HTTP Server
The HTTP server URL used for firmware upgrade and configuration via HTTP.
For example: http://provisioning.mycompany.com:6688/Grandstream/1.2.5.3
Here “:6688
” is the specific TCP port that the HTTP server is using; omit if using
default port 80.
Note: If Auto Upgrade is set to No, GXP
will only perform HTTP download once
at boot up.
Config Server Path
IP address or domain name of firmware server.
XML Config File Password
(For
GXP280/GXP/285/GXP1200
Only)
The XML provisioning system allows Grandstream phones to perform
configuration updates via XML configuration files. Users can set the XML config
file password in the web UI of the phone.
Firmware File
Prefix/Postfix
Default is blank. If configured, GXP will request the firmware file with the
prefix/postfix. This setting is useful for ITSPs. End user should keep it blank.
Config File
Prefix/Postfix
Default is blank. End user should keep it blank.
Allow DHCP Option 43 and
Option 66 to override
server
Default is Yes. This allows the device to get provisioned automatically.
Authenticate Conf File
Default is “No”. If set to “Yes”, configuration file would be authenticated before
acceptance. End user should use default setting.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grandstream GXP-1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grandstream GXP-1200 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grandstream GXP-1200

Grandstream GXP-1200 Quick start guide - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info