470664
21
Zoom out
Zoom in
Previous page
1/44
Next page
Grandstream Networks, Inc. GXP User Manual Page 21 of 44
Firmware 1.2.5.3 Last Updated: 03/2011
1. Blind Transfer: Press “TRANSFER (or TRNF for GXP-2000)” button, then dial the number and
press the “SEND” button to complete transfer of active call.
2. Attended (or Supervised) Transfer: Press “LINEx” button to make a call and automatically place
the ACTIVE LINE on HOLD. Once the second call is established, press TRANSFER (or TRNF)
key then the LINE button of the waiting line to transfer the call. Hang up the phone call after
“Transfer Successful” is displayed in the screen.
3. Semi-Attended Transfer: In the web UI, under “Account Settings”, select the Semi-attended
Transfer Mode. There are two modes to select for this feature. RFC5589 and Send Refer with early
dialog:
a. With RFC5589 phone will not send out REFER to transferee until 200OK is received from
transfer target. Like an attended transfer, press “LINEx” button to make a call and
automatically place the ACTIVE LINE on HOLD. Dial the second call, and as it is ringing
press the “TRANSFER (or TRNF)” key and then the blinking LINE button of the call on hold
to transfer the call.
b. With "Send REFER with early dialog" mode phone will send out REFER as soon as the
transfer target is selected (in the early dialog stage). Like an attended transfer, press “LINEx”
button to make a call and automatically place the ACTIVE LINE on HOLD. Dial the second
call, and as it is ringing press the “TRANSFER (or TRNF)” key and then the blinking LINE
button of the call on hold to transfer the call. Transferor will hang up.
4. Auto-Attended Transfer (only on GXP1200): In the web UI, under “Advanced Settings”, set “Auto-
attended Transfer” to “Yes”.
Establish a call between two phones
Press TRANSFER button on GXP1200
Select another line on GXP1200, call another phone and press SEND button
If the remote phone answers, press TRANSFER button on GXP1200 to transfer the call
NOTE: If there is no extra line available, GXP1200 will do the transfer as if Auto-attended
transfer is disabled.
5-Way Conferencing
GXP can host conference calls and supports up to 5-way conference calling.
2. Initiate a Conference Call
:
Establish a connection with two or more parties
Press CONF button
Choose the desired line to join the conference by pressing the corresponding LINE button.
Repeat previous two steps for all other parties that would like to join the conference. This
can be done at any time. However, if a new call comes in, the other calls will be placed on
hold and the host will have to individually re-join the held lines back into the conference by
repeating the previous two steps again.
3. Cancel Conference: Canceling establishing conference call.
If after pressing the “CONF” button, a user decides not to conference anyone, press CONF
again or the original LINE button.
This will resume two-way conversation.
4. End Conference:
Press HOLD to end the conference call and put all parties on hold;
To speak with an individual party, select the corresponding blinking LINE.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grandstream GXP-1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grandstream GXP-1200 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grandstream GXP-1200

Grandstream GXP-1200 Quick start guide - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info