482104
14
Zoom out
Zoom in
Previous page
1/48
Next page
76-504-0961 13/GB
Starting up
Connect the appliance to a suitable power supply.
The numbers now shown in the display indicate the actual temperature in the cabinet
and also that power is on. The diode under
indicates that the compressor is
running.
A switch is located under the illuminated top panel. When the switch is pressed, all
lights in the cabinet and the panel go out.
NOTE when servicing: If service work is performed on electrical parts, isolate the
appliance by unplugging it from the power supply.
Temperature setting
If desired, the temperature can be changed by the controller concealed behind the
light screen. (The controller is concealed to prevent the settings being tampered
with). To gain access to the controller, first remove the right hand end piece on the
illuminated panel by loosening the top and bottom screws (see drawing under
"Starting up"). The plastic light screen can now be drawn about 10 cm to the right to
give access to the controller.
Temperature check:
Press the key lightly, "set" is displayed.
Pressing the
key lightly again will display the set temperature. If more than 15
seconds passes without any operation of the keys, the controller returns to normal
operation. Pressing the key will also cause a return to normal operation.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gram MIDI KG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gram MIDI KG in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info