482114
26
Zoom out
Zoom in
Previous page
1/36
Next page
M60
GB Instructions for use 2
NL Gebruiksaanwijzing 18
KS 290 / KS 360 / KS 390 / KS 292 /
KS 362 / KSD 29 / KSD 36 / KSD 39
2
GB
Congratulations on your new GRAM
refrigerator
Congratulations on your new refrigerator. The refrigerator was developed taking
the different storage requirements of food items into consideration. Some must
be stored cold - others require a little higher temperature. A few must be stored
separately so as not to impart flavour and odour to other items of food. Most items
of food require high air humidity in order to stay fresh.
To ensure that you get as much joy out of your new refrigerator as possible, it is
important that you become familiar with the refrigerator functions and know how to
use the accessories. Please read the instructions for use carefully before setting
up and using your refrigerator.
As these instructions apply to several refrigerator models, the equipment may vary
from model to model.
Before using the refrigerator
On receipt, check to ensure that the refrigerator has not become damaged in
transport. Transport damage should be reported to the local supplier before the
refrigerator is put to use.
Before filling the refrigerator with items of food, the refrigerator interior should be
cleaned with lukewarm water containing a mild detergent. Use a soft cloth. If the
refrigerator has been stored in cold surroundings (colder than +5°C), it must be
allowed to stabilise for at least 2 hours before being switched on.
Read more about setting up, building in, and installation on pages 13 and 14.
3
GB
Contents
Important information
Transporting and moving the refrigerator 5
If the refrigerator is to remain unused for a time 5
Old refrigerators 5
Disposal 5
Product description
Using the refrigerator
Electronic control 7
Temperature regulation 8
Temperature inside the refrigerator 8
Brief temperature variations 8
Alarm
Alarm codes 9
Interrupting an alarm 9
Using the refrigerator and accessories
Glass shelves 10
Bottle shelf 10
Vegetable drawers 10
Multi-boxes 10
Storage shelves in the door 10
4
GB
Defrosting and cleaning
Automatic defrosting 11
Manual defrosting 11
Cleaning 11
Setting up and installation
Where to place the refrigerator 13
Building into a kitchen element 13
Building into a refrigerator element 13
Electrical connection 14
Starting up the refrigerator 14
You can change the door from right-hinged to
left-hinged or vice versa yourself 15
Replacing the bulb 17
GRAM Service
Spare parts 17
5
GB
Important information
The refrigerator contains the
environment-friendly, non-ozone-
depleting refrigerant R600a. As R600
is a flammable gas, it is important to
avoid damage to the refrigeration
circuit during transport and installation.
If the refrigeration circuit is damaged,
avoid using naked flame in the vicinity
of the refrigerator and connecting
power to the refrigerator. Also make
sure that there is good ventilation in
the room. If you are in doubt, please
contact your supplier.
Transporting and moving
the refrigerator
The refrigerator must always be moved
in the vertical position. The cabinet
must not be tilted more than approx.
40°. If the refrigerator has been tilted
more than 40°, the power supply must
not be connected until the appliance
has stood upright for at least two
hours.
If the refrigerator is not to
be used for some time
If the refrigerator is to remain unused
for a time, switch it off by pressing
button
O (2). Then disconnect
the power supply to the refrigerator and
possibly pull the plug out of the wall
socket.
Empty, defrost and clean the
refrigerator. Leave the refrigerator door
slightly ajar. This will prevent bad
smells in the refrigerator.
Warning
Old refrigerators and freezers are often
fitted with complicated latches that can
only be opened from the outside. If you
have an old unit like this stored away
somewhere, or if you scrap it,
remember to destroy the latch to
prevent children from being exposed to
danger by getting locked inside the
unit.
Note! Please also observe the
environmental rules on disposal.
Disposal
If a refrigerator is to be disposed of,
this must be done in an
environmentally correct way, in
accordance with current rules on
disposal.
Please observe the environmental
rules on disposal. There might be
special requirements/conditions to be
observed.
Information on disposal can be
obtained from:
- Gram Domestic A/S
- Your white-goods supplier
- Authorities (the local council, Ministry
of the Environment, etc.)
6
GB
Product description
The refrigerator is intended for use in a
normal household. It is designed for
temperature class SN in accordance
with European standard EN 153. This
means that the refrigerator will run
best at a room temperature of +10°C to
Control panel
Halogen lamp
Glass shelves
Bottle shelf
Multi-boxes
Storage shelves
Halogen lamp
Rubber sealing strip
Condenser
Nameplate
Evaporation tray
Vegetable drawers
Compressor
Compressor compartment
Door handle
Adjustable feet
+32°C.
7
GB
1
2
3
4
5
6
7
Using the refrigerator
Electronic control
The refrigerator is equipped with
electronic control. The control panel is
concealed behind the refrigerator door.
The refrigerator has been factory-set to
operate at optimum temperature, i.e.
+5°C. If you wish to change the preset
temperature, the new setting will be
stored in the electronic control. In case
of power failure, the control will
remember the latest setting when
power to the cabinet is restored.
The electronic control has
the following functions:
· On/off function
· Display of actual temperature
· Temperature setting
· Acoustic and visual alarms
· Emergency program in case
of sensor fault
· Service program (not
accessible to user)
· Light-emitting diodes
· Power-saving sensors
1. Start button
2. Switch
3. Green light-emitting diode
indicating that the refrigerator
is switched on
4. Button for displaying and
setting temperature
5. Display indicating set and
actual temperature
temperature
6. Button for infinite temperature
regulation upwards
7. Button for infinite temperature
regulation downwards
8
Temperature regulation
The temperature can be set from +2 to
+9°C by pressing button COOL (4)
and keeping it depressed. The set
temperature is shown in the display.
Press button (6) or (7) until
the new required temperature is
reached.
A brief acoustic signal will be given
when each button is activated.
When activating the buttons Start
(1) and Interrupt
O (2), the action
will not become visible on the display
until after approx. 2 seconds.
If there has been a power failure or the
current to the refrigerator has been
disconnected, the control will
remember the latest setting when
power is reconnected.
Temperature inside the
refrigerator
The temperatures set and displayed
are the average temperatures in the
refrigerator.
Do not change the temperature setting
of your refrigerator simply because it
becomes warmer in summer. A
temperature increase will be detected
by the refrigerator, and the compressor
will automatically run longer to
maintain the selected temperature.
GB
99
99
9
88
88
8
Brief temperature variations
Brief temperature variations are
normal and may occur when for
example fresh items of food are stored
in the refrigerator or when the door is
open for longer periods. Items of food
in the cabinet will not be affected by
these variations and the temperature
will quickly return to normal.
The interior light is turned on when the
refrigerator door is opened. When the
door is closed again, the light remains
switched on for about 5 seconds. If the
door is still open about 2 minutes later,
the interior light is turned off. Alarm E4
is displayed and an acoustic signal is
given.
9
GB
Alarm
Normal use of the refrigerator may give
rise to various disruptions with
unstable refrigerator function as a
consequence. These disruptions are
shown on the display by means of an
alarm code (an E followed by a
number), and an acoustic signal is
given.
In case of several faults, the alarm
codes will be displayed in turn.
Alarm codes
99
99
9
88
88
8
E1 - Temperature sensor fault
E3 - Evaporator sensor fault
E4 - Open door
E5 - Temperature too high
E6 - Temperature too high at power
failure
E1 and E3
One of the temperature sensors has
been damaged. Call service. A built-in
emergency program maintains an
acceptable temperature until the fault
is corrected.
E4
The refrigerator door is open for more
than 2 minutes. The alarm code
disappears when the door is closed. If
the door is opened and closed
repeatedly within a short space of time,
the interior light will eventually switch
off.
E5
The temperature in the refrigerator has
been higher than the set temperature
for more than 2 hours.
E6
There has been a power failure, the
power supply to the refrigerator has
been disconnected or the temperature
in the refrigerator has been higher than
the set temperature for more than 2
hours.
Interrupting an alarm
The acoustic alarm can always be
interrupted by opening the door and
pressing any button.
An alarm code will be displayed even
though the reason for the alarm no
longer exists. To remove the alarm
code press button (6) and
(7) simultaneously for 2 to 3 seconds.
An acoustic alarm cannot then be
given for the next 2 hours.
10
GB
10
9
8
Using the refrigerator and accessories
Glass shelves
The glass shelves can be arranged to
give more, or less, space between the
shelves thus allowing flexible cabinet
arrangement (8 and 9).
Extract the shelf by lifting up the left
shelf side (10). Start by removing the
top shelf when you want to clean the
refrigerator or rearrange the shelves.
The glass shelves can be tilted for
storing large and opened bottles. To tilt
the shelf, turn the rear fitting.
Bottle shelf
The bottle shelf is suitable for large
and small bottles.
Vegetable drawers
The drawers in the bottom of the cabinet
are suitable for storing fruit and
vegetables. The overlying shelf covers
the drawer and maintains humidity thus
preventing stored food from drying out.
Multi-boxe
The multi-boxes are ideal for all items
of food and can be placed in the
cabinet or the door, whichever is most
expedient. The tight-fitting lids prevent
drying out and save much time in
tedious wrapping and unwrapping.
The multi-boxes are made of material
that remains unaffected by mineral
oils, fats and weak acids. They
withstand temperatures up to 100°C
and can be cleaned in a dishwasher,
but must never be placed close to the
heating element.
Multi-boxes can also be purchased as
accessories.
Storage shelves in the door
The shelves in the door can hold
bottles of up to 2 litres. They can be
moved and placed throughout the
entire height of the door.
11
Cleaning
Stop the compressor by pressing
button
O (2) and disconnect the
power supply to the refrigerator.
GB
11
Defrosting and cleaning
Automatic defrosting
The refrigerator features automatic
defrosting. In some periods, however,
frost may form on the rear wall of the
refrigerator. This normally happens
when many fresh items of food are
stored in the refrigerator or in summer
when the refrigerator is filled with
beverages to be cooled. In situations
such as these the compressor must
run for long periods of time. As
automatic defrosting takes place while
the compressor is at a standstill, the
refrigerator may not defrost completely
before the compressor restarts. In
these instances, manual defrosting is
required.
Manual defrosting
Stop the compressor by pressing
button
O (2) and disconnect the
power supply to the refrigerator.
Any loose frost on the evaporator can
be removed using a plastic or wooden
scraper. Never use a knife or a sharp
object as these can damage the
evaporator.
Warning
It is dangerous to use electrical
apparatus, knives or sharp objects to
speed up the defrosting process.
The refrigerator is best cleaned using
a weak soap solution and a soft cloth.
Never use cleaning agents that scour.
Clean the sealing strip around the
door regularly to prolong its life. Use
only clean water for cleaning the
sealing strip.
The plastic parts of the cabinet cannot
withstand boiling water (max. 85°C). It
is important to prevent water from
getting into the control panel
Clean the melt water drain in the
refrigerator compartment using the
cleaning pin supplied (11).
Remove dust and threads from the
compressor compartment at the back of
the refrigerator with a vacuum cleaner.
Connect the current and restart the
refrigerator by pressing start button
(1).
12
GB
Cleaning of doors in
stainless steel or aluminium
Stainless steel or aluminium doors on
GRAM products can, with advantage,
be cleaned with a spray and a soft
cloth. There are a number of different
spraying agents for this purpose on
the market. We recommend that you
contact your usual white goods
supplier for advise on the advantages
and disadvantages of the individual
products. However, we would point out
that GRAM has good experience with
the following cleaning agents:
For stainless steel products:
· Inox Plejespray from Würth or
Steel Clean
· Precision Degreasing Solvent
292 or Metal Surface
Degreaser 277 – both from
Chesterton.
For aluminium products
· Precision Degreasing Solvent
292 or Metal Surface
Degreaser 277 – both from
Chesterton.
Chesterton products can be
purchased through
www.chesterton.com
14
Proceed as follows:
Connect the GREEN-AND-YELLOW
core to the plug terminal marked „E” or
by an earth symbol, or coloured
GREEN or GREEN-AND-YELLOW.
Connect the BLUE core to the plug
terminal marked „N” or coloured
BLACK.
Connect the BROWN core to the plug
terminal marked „L” or coloured RED
Starting up the refrigerator
Start the refrigerator by plugging into a
wall socket.
If the mains lead has been damaged,
it must be replaced with a
corresponding type supplied by Gram
Domestic A/S or a Gram Domestic
service centre.
The refrigerator incorporates a „stand-
by function” and in the display two
horizontal lines indicate that the power
supply has been connected.
Start the refrigerator by pressing the
start button (1). After approx. 2
seconds, the green light emitting diode
(3) lights to indicate that the refrigerator
is switched on. The actual temperature
in the refrigerating compartment is
shown on the display (6).
GB
Electrical connection
The appliance is intended for
connection to alternating current. The
connection values for voltage (V) and
frequency (Hz) are given on the
nameplate in the cabinet.
Power must be connected via a wall
socket with switch. The wall socket
should be easily accessible.
All earthing requirements stipulated by
the local electricity authority must be
observed. The cabinet plug and wall
socket should then give correct
earthing. If in doubt, contact your local
supplier or an authorised electrician.
WARNINGThis appliance must
be earthed
The flexible cord (mains lead) fitted to
this appliance has three cores for use
with a 3-pin 13-amp or 3-pin 15-amp
plug. If a BS 1363 (13-amp) fused plug
is used, it should be fitted with a 13-
amp fuse.
IMPORTANT
The cores in this mains lead are
coloured in accordance with the
following code:
GREEN-AND-YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
These colours might not correspond
with the colour markings identifying the
terminals in your plug.
15
GB
You can change the door from
right-hinged to left-hinged or vice
versa yourself
Illustrations 14-19 show how easy it is
to change the doors from right-hinged
to left-hinged - or vice versa. (Changing
the door from left-hinged to right-
hinged is done in the same way, but
opposite).
The refrigerator must be switched off
and emptied completely.
· Remove the two screws in the
hinge top on the righthand
side of the cabinet. (14)
· Lift the refrigerator door
slightly and take the door and
upper hinge off by pulling the
door towards you.
· Remove the dummy hinge
from the opposite side by
unscrewing the two screws.
(15)
· Reverse the dummy hinge
and refit it on the opposite
side of the cabinet using two
screws.
· Tilt the refrigerator to an angle
of max. 45° and unscrew the
lower hinge. This is done by
removing the two screws
holding the bottom hinge on
the cabinet underside. (16)
· Remove the lower dummy hinge
in the opposite side in the same
way as the upper dummy hinge
was removed. (17)
· Reverse the dummy hinge
and refit it on the opposite
side of the cabinet.
· Reverse the upper righthand
hinge and refit it in the lower
lefthand corner of the cabinet.
· Place the cabinet in the
correct position again.
· Remove the door handle by
removing the screws. (18)
· Reverse the lower righthand
hinge and refit it on the top
part of the door in the left side
of the cabinet. Push the door
into position and slide the
upper hinge into the upper
lefthand hinge casing. Tighten
the two screws. Remember to
adjust the hinges.
Remove the screws on the
righthand side of the door and
screw them onto the left side
of the door. Use the screws
from the left side to attach the
handle to the righthand edge
of the door. (19)
·
16
GB
14
15
16
19
18
17
26
NL
10
9
8
Gebruik van het koelkast en toebehoren
Glasschappen
De glasschappen zijn om te draaien
zodat de afstand tussen de
schappen groter of kleiner en de
inrichting van de koelkast flexibeler
wordt. (8 en 9)
Haal de schappen eruit door het schap
aan de linkerkant (10) omhoog te tillen.
Als u wilt schoonmaken of de
plaatsing van de schappen wilt
wijzigen, moet u de bovenste eerst
weghalen. De glasschappen zijn
schuin te stellen voor het bergen van
grote en geopende flessen. Om het
schap schuin te kunnen zetten moet
de achterste kantlijst omgedraaid
worden.
Flessenrek
Het flessenrek is geschikt voor grote
en kleine flessen.
Groenteladen
De laden onderin het koelkast zijn
geschikt voor het bewaren van
groenten en fruit. De schap die erover
ligt, werkt als deksel, waardoor het
vochtgehalte bewaard blijft zodat de
levensmiddelen niet uitdrogen.
Multiboxen
De multiboxen zijn ideaal voor allerlei
levensmiddelen en kunnen naar
behoefte in de kast of in de deur gezet
worden. Met de goed sluitende deksel
voorkomt u uitdroging en het lastige in-
en uitpakken. Spijsoliën, vetten en
zwakke zuren tasten het materiaal van
de multiboxen niet aan. De multiboxen
zijn ook los verkrijgbaar.
Flessenrekken in de deur
In de flessenrekken van de deur is
plaats voor grote tweeliterflessen. De
rekken zijn naar wens over de hele
hoogte van de deur te plaatsen.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gram KS290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gram KS290 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info