482112

Gram KS2400 Manual

35
Zoom out
Zoom in
Previous page
1/47
Next page
35
to alternating current. The connection
values for voltage (V) and frequency (Hz)
are given on the nameplate in the cabinet
. Power must be connected via a wall
socket with a switch. The wall socket sho-
uld be easily accessible.
All earthing requirements stipulated by the
local electricity authorities must be observ-
ed. The refrigerator plug and wall socket
should then give the correct earthing. If in
doubt, contact your supplier or authorised
electrician.
WARNING
The flexible cord (mains lead) fitted to this
appliance has three cores for use with a 3-
pin 13-Amp or 3-pin 15-Amp plug. If a B.S.
1363 (13-Amp) fused plug is used, it
should be fitted with a 13-Amp fuse.
IMPORTANT
The wires in this mains lead are coloured
in accordance with the following code:
GREEN-AND-YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
The colours of the wires in the mains lead
of this appliance might not correspond with
the colour markings identifying the termi-
nals in your plug.
Proceed as follows:
Connect the GREEN-AND-YELLOW wire
to the plug terminal marked “E” or an earth
symbol, or coloured GREEN, or
GREEN-AND-YELLOW. Connect the
BLUE wire to the plug terminal marked “N”
or coloured BLACK.
Connect the BROWN wire to the plug ter-
minal marked “L” or coloured RED.
Illustration shows how easy it is to
4
3
change the door from right-hinged to left-
hinged - or vice versa.
Lay the refrigerator on its back, front
uppermost. First, using a 2.5 mm hexagon
key, remove the handle . Remove the
front legs using an 8 mm hexagon key.
This also releases the lower hinge.
Transfer top and bottom hinges to the
opposite side.
Bottom hinge:
Using a 13 mm open-ended spanner and a
2 mm hexagon key, move hinge pin and
grubscrew to opposite hand.
Top hinge:
Move hinge pin to opposite side. Note
that the pin must be mounted opposite
hand when it is moved to the opposite
side, i.e. it must be turned 1/4 turn.
It might be necessary to use pliers when
pulling the hinge pin free from the top.
Move the cover plug on the top of the door
to the opposite side.
When the door has been mounted, a 9 mm
filler (wood or something similar) should be
used at the bottom hinge. Place it between
the cabinet front and the door edge to pro-
vide suitable clearance for the sealing
strip.
Remember to place the correct number of
washers beneath the bottom hinge to en-
sure that the door has the correct height.
Fit the hinge under the leg.
When the door has been adjusted, screw
the leg in firmly and lock the hinge by
tightening the grubscrew against the cabi-
net.
Refit the door handle.
If during transport the refrigerator has
been laid down, or if it has been stored in
cold surroundings (colder than +5°C) it
must be allowed to stabilise for at least 1
hour before being switched on.
4
3
2
1
You can change the
door from right-hinged
to left-hinged or vice
versa yourself
GB
Starting up
Type 76-004-1260 09/09/04 10:48 Side 35
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gram KS2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gram KS2400 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info