354438
22
Zoom out
Zoom in
Previous page
1/36
Next page
22
Illistration shows how easy it is to change the
door from right-hinged to left-hinged - or vice versa.
Take off the table top by removing two screws at
the front of the cabinet and three at the back.
Lay the appliance on its back with the door up.
Remove the door handle.
Unscrew the adjusting screws and take the lower
hinge brackets off.
Remove the door.
Take off the upper hinge bracket and refit it on the
opposite side of the cabinet.
Replace the door.
Move the pin on the hinge bracket to the other
threaded hole before refitting the hinge brackets
on the opposite lower side of the cabinet.
The appliance is intended for connection to
alternating current. The connection values for
voltage (V) and frequency (Hz) are given on the
nameplate in the cabinet.
Power must be connected via a wall socket with
switch. The wall socket should be easily
accessible.
All earthing requirements stipulated by the local
electricity authority must be observed. The
appliance plug and wall socket should then give
correct earthing. If in doubt, contact your local
supplier or an authorised electrician.
WARNING
The flexible cord (mains lead) fitted to this
appliance has three cores for use with a 3-pin 13-
amp or 3-pin 15-amp plug. If a BS 1363 (13-amp)
fused plug is used, it should be fitted with a 13-
amp fuse.
If the refrigerator is placed beside another
refrigerator or freezer, there must be at least 2 cm
clearance between them.
If the appliance is not built in but positioned with
its door hinge side against a wall, there should be
at least 5 cm between the appliance and the wall
in order to allow the door to open easily.
The refrigerator must not be laid horizontally while
being transported or moved. If the appliance has
been tilted more than 40°, the power supply must
not be connected until the appliance has stood
upright for at least two hours.
Electrical connection
3
2
You can change the
door from right-hinged
to left-hinged or vice
versa yourself
4
IMPORTANT
The cores in this mains lead are coloured in
accordance with the following code:
GREEN-AND-YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
These colours might not correspond with the colour
markings identifying the terminals in your plug.
Proceed as follows:
Connect the GREEN-AND-YELLOW core to the
plug terminal marked “E” or by an earth symbol,
or coloured GREEN or GREEN-AND-YELLOW.
Connect the BLUE core to the plug terminal
marked “N” or coloured BLACK. Connect the
BROWN core to the plug terminal marked “L” or
coloured RED.
GB
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gram ks 150 01 g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gram ks 150 01 g in the language / languages: Dutch as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info